48 x 18 x 18 High Tech Rimless Build (photo heavy)
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 01-25-2013, 03:44 AM   #1
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

48 x 18 x 18 High Tech Rimless Build (photo heavy)


The last few days have been a whirlwind of activity. Ive committed to tearing down and selling off my reef aquarium as I did not want to move it into my new apartment. Im not one to go without an aquarium for long, so I'm planning on salvaging a significant portion of my old old equipment to be re purposed for a planted tank (something I have dearly missed over the last few years).

I've started ordering my parts, including the rimless tank itself (it should be ready within a couple of weeks).

The build will be as follows:

Tank: 48"x18"x18"
Lighting: 48 x Cree XPG's, 24 x Cree XPE Royal Blues, 4 GHL Simu Spot moonlights (Reed, White and Blue LED's), Dimmable via Meanwell ELN-60-48-D's
CO2: 5lb Bottle, Aqua Medic CO2 Reactor 1000 (I used to own one and loved it), Reef Fanatic CO2 Regulator w/solenoid and bubble counter
Filtration: Undecided, will be a sizable canister filter, brand not yet determined (Maybe a Rena?)
Substrate: Not sure on this yet, open to suggestions (Eco complete or Flourite are easy to get and reasonably priced out here. Ive used both before)
Heating: Hydor ETH 300 Watt External Heater
Cooling: 1/10th HP Chiller (undersized, but most likely will never get used, was able to cool my 90 Gallon reef easily so should be fine for this tank)
Dosing: GHL 4 Pump Dosing Pump w/Bubble Magus Dosing chambers full of ferts
Automation: Profilux IIIex w/expansion box. Unit will control sunrise/Sunset, Cloud simulation, storm simulation, heating, cooling, fan speeds for the LED's, CO2 Injection (via Ph monitoring), possibly auto top off (havent decided on this yet).

I am fortunate enough that I already have most of the expensive equipment (including all of the LED's, drivers, Profilux equipment, chiller, CO2 Regulator). Leaving me with a relatively short shopping list:

Aquarium itself (ordered yesterday)
Stand (may build one, havent decided)
2 x 6"x20" Heatsinks
72 x 60 degree optics
Thermal Paste
Cannister filter
5lb CO2 Bottle (needed a short one to fit in the stand, I picked this up today)
Co2 Reactor (Aqua Medic Reactor 1000)
External Heater

The proceeds from selling off my reef equipment has offset about a third of this so far, and hopefully will cover another third before I am done.

I'm a couple of months away from seeing water in a tank as there will be some work in building the new light and obtaining the rest of my parts. I"ll probably start with stripping the old LED arrays and building the new one.

Progress to follow, its just the beginning.

Last edited by GDominy; 02-18-2013 at 06:50 AM.. Reason: Updated title
GDominy is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-25-2013, 03:55 AM   #2
BoxxerBoyDrew
Planted Tank Enthusiast
 
PTrader: (12/100%)
Join Date: Oct 2005
Location: Waco,Tx
Posts: 648
Default

Sounds like this is going to be a TOP END Aquarium!!!

Can't wait to see it all come together!
Keep us updated with your progress!
Drew
BoxxerBoyDrew is offline   Reply With Quote
Old 01-25-2013, 08:37 AM   #3
fusiongt
Planted Tank Enthusiast
 
PTrader: (2/100%)
Join Date: Nov 2011
Location: Menlo Park, Ca
Posts: 812
Default

No pictures... no replies! (Look forward to seeing more though heh)
__________________
fusiongt is offline   Reply With Quote
Old 01-26-2013, 05:04 AM   #4
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Playing with my new camera.. here is the first part of the build. Ive never owned a cylinder this small (5lb)!

GDominy is offline   Reply With Quote
Old 01-26-2013, 06:19 PM   #5
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Here are the LED fixtures I am going to be robbing for parts to make this new build. These pics are a couple years old now, but you get the idea.

This first pic is of a Current USA Outer Orbit fixture that I modified. I replaced the 2 x 250w metal halide bulbs with a pair of LED arrays housing 12 x Cree XPG (Cool White) and 12 Cree XPE (Royal Blue) on each heatsink (48 LED's total). I plan on robbing all 24 Cree XPG's from this fixture.



These next few images are of a another set of fixtures I made for another reef tank, I plan on using all of the XPG's and 24 of the Royal Blue LED's from these. I will also be reusing the fans on these fixtures as they push a lot of air, and run very quietly.



GDominy is offline   Reply With Quote
Old 02-16-2013, 04:53 AM   #6
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Well, today I began the process of tearing down my reef, and salvaging the equipment that will be used on this tank. Came across a few pieces of equipment that will come in handy!

First off, the doser. This is a GHL 4 Pump Slave doser that will be controlled by my Profilux. It has served me well in the past, and I am looking forward to having it dose my fertilizers automatically for me.



Secondly, the Dosing chambers. I have two 5 Litre containers and two 2.5 litre containers. These will house whatever ferts I decide to come up with. Typically I used to dose KNo3, Potassium, Iron, and Tropica Master grow (I think its Plant nutrition liquid these days) for micros.



And I totally forgot I had this... I used to have a collection of Ecotech pumps but sold most of them off after I got rid of my 265 gallon aquarium. This is an older Mp10, but I have the Mp10ES upgrade kit, and the wireless module to upgrade it. Once it is wireless, my profilux will be able to control it (via the GHL Vortech control module). This will be mounted on the tank opposite to the canister filter return, and will be used to produce random currents. I can program this pump with the profilux to produce different wave patterns whenever I want at any time during the day (such as 10% at night, then random waves throughout the day, or running full tilt during a thunderstorm)



More parts are coming home with me tomorrow once the reef is torn down.

Also as a plus my tank has been built and I will be picking it up next week. Once my stand arrives this build is about to kick off!
GDominy is offline   Reply With Quote
Old 02-16-2013, 07:11 AM   #7
SouthernCichlids
Planted Tank Obsessed
 
SouthernCichlids's Avatar
 
PTrader: (26/100%)
Join Date: Jan 2013
Location: NC
Posts: 347
Default

Sounds like this is going to be awesome! Can't wait to see what you fill it with!
SouthernCichlids is offline   Reply With Quote
Old 02-16-2013, 05:50 PM   #8
im2smart4u
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Dec 2010
Location: Fayetteville, AR
Posts: 333
Default

This seems like it will be a great tank. I love watching high tech builds... it just makes me wish I could afford one myself.
im2smart4u is offline   Reply With Quote
Old 02-16-2013, 06:17 PM   #9
Higher Thinking
So good my algae pearls!
 
Higher Thinking's Avatar
 
PTrader: (23/100%)
Join Date: Mar 2011
Location: Oregon State Beavers!
Posts: 1,505
Default

Rather than purchasing the aquamedic reactor, why not just build one yourself for like twenty bucks? It seems you like to purchase top end quality and gadgets, but that is definitely somewhere you could save money if you were interested.
__________________
Higher Thinking is online now   Reply With Quote
Old 02-16-2013, 10:49 PM   #10
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Holy crap today was a busy day. Recovered all of the equipment I want to re-use and sold off a ton of older stuff. Picked up my first 4 bags of flourite dark (I'm going to need several more).

Here is most of the major equipment I plan on re-using.

On the right you can see the LED array as I plan on laying it out in the new light hood. Two 30" strips in the middle (12 Cree XPGs Cool White, and 12 Cree XPE Royal Blue), with a 12 LED pendant dead center (6 XPG and 6 XPE) to brighten it up. Then 2 pendants on the ends with 12 XPG and 12 XPE each (where most of the planting will be, negative space in the middle).

The left is most of the profilux equipment. The Profilux 3eX, Expansion box and doser. There are 3 x 6 outlet power bars, but I suspect I will really only be using two of them.

Its starting to come together... Should be grabbing the tank on thursday

GDominy is offline   Reply With Quote
Old 02-16-2013, 10:52 PM   #11
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Quote:
Originally Posted by Higher Thinking View Post
Rather than purchasing the aquamedic reactor, why not just build one yourself for like twenty bucks? It seems you like to purchase top end quality and gadgets, but that is definitely somewhere you could save money if you were interested.
I used to own one and I loved it, and they only cost about $100-120. I just sold a grand worth of equipment off my reef and another $500 in corals so my budget for this tank is pretty much covered. I've actually broke even so far with setting up this tank with the sales off my old one.

I'm not ruling out the possibility of building my own, but time is something I have precious little of. I don't mind spending some money to have an off the shelf solution.
GDominy is offline   Reply With Quote
Old 02-16-2013, 10:56 PM   #12
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Forgot to mention there is also a 25 watt UV sterilizer in there that I pulled off the reef. This will come in handy in case I totally screw up my ferts and cause a green water outbreak (which I have done in the past, was horrible).

There is also a nice heater in there that I had completely forgotten I owned so I wont be purchasing an external heater after all. This is a 300w titanium heater that originally came with an external thermostat, but I dont require as my profilux will control it directly.

Not shown is the 1/10th HP chiller. I am still not sure if I will permanently attach it, or if I will simply store it until I need it for summer (the apartment gets pretty hot)
GDominy is offline   Reply With Quote
Old 02-16-2013, 11:09 PM   #13
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

More goodies:

The Profilux Touch (touchscreen LCD for the controller) and Vortech control module

GDominy is offline   Reply With Quote
Old 02-16-2013, 11:15 PM   #14
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

This incredible mess was the back of my old canopy. In the process of dismantling today most of the wiring had to be cut free and needs to be totally redone. Most of these drivers are Meanwel ELN-60-48D (0-10V Dimming) while two of them are ELN-60-48P connected to 2 x Profilux LEDControl4-Passive's. I built a custom 10V pullup resistor circuit to drive these two, as I can use the Profilux modules to generate Lightning flashes on these drivers during a simulated thunderstorm. I hope to use this feature again in this build.



I know its a mess, I almost didnt want to show this, but I am kind of looking forward to doing a "before and after" shot of the wiring
GDominy is offline   Reply With Quote
Old 02-16-2013, 11:50 PM   #15
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

My Profilux 3eX is pretty much stock, but I have added the ADIN module which allows for analog and digital input. My hope is to integrate this with an external logic box to do some fun stuff and trigger events. More on this later.

I've pretty much fully loaded my Profilux Expansion box (the bottom unit). I have added 12 extra L Ports (the 0-10V ports that are used for controlling things like dimmable lighting, speed controlled pumps, etc). I usually use my expansion box as the interface for the lights and have it remotely mounted in a canopy. I won't be able to do that with this build, but I still plan on using many, many L ports to control all of the LED's. The goal is to be able to control every string of 12 LED's seperately to really dial in some nice visual effects.



While most of the features of the "EX" model are salt water oriented, I will still be uing the sensors for Ph, Temperature, and Level control
GDominy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:47 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012