Ultimate diy co2 cap?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 02-07-2013, 10:41 PM   #1
Sugardaddy1979
Sic em
 
Sugardaddy1979's Avatar
 
PTrader: (12/100%)
Join Date: Jan 2012
Location: Athens, GA
Posts: 639
Default

Ultimate diy co2 cap?


What do you think? 5 bucks each on fleabay.
__________________
Sunsun Pimp Club Member #068

Last edited by Sugardaddy1979; 03-14-2013 at 01:13 AM..
Sugardaddy1979 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-07-2013, 10:53 PM   #2
pastert33
Algae Grower
 
PTrader: (5/100%)
Join Date: Jan 2013
Location: Georgia
Posts: 115
Default

Very nice! If I did any buying on EBay I'd be all over this! Also nice to see another Dawg fan!
pastert33 is offline   Reply With Quote Quick reply to this message
Old 02-07-2013, 10:59 PM   #3
Sugardaddy1979
Sic em
 
Sugardaddy1979's Avatar
 
PTrader: (12/100%)
Join Date: Jan 2012
Location: Athens, GA
Posts: 639
Default

Sic em!
__________________
Sunsun Pimp Club Member #068
Sugardaddy1979 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 01:11 AM   #4
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (74/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,378
Default

Has anyone bought one of these? If so, does it fit a standard 2L bottle very well? It is a great deal, at $5 with shipping included.

They illustrate the usage of this by showing it on a 2L bottle with a 90 psi pressure gage on the other opening, and no safety valve showing. Will one of those bottles actually hold that much pressure?
__________________
Hoppy
Hoppy is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 01:38 AM   #5
Sugardaddy1979
Sic em
 
Sugardaddy1979's Avatar
 
PTrader: (12/100%)
Join Date: Jan 2012
Location: Athens, GA
Posts: 639
Default

I'm thinking I might throw 15 bucks out there and try it.
__________________
Sunsun Pimp Club Member #068
Sugardaddy1979 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 01:41 AM   #6
Sugardaddy1979
Sic em
 
Sugardaddy1979's Avatar
 
PTrader: (12/100%)
Join Date: Jan 2012
Location: Athens, GA
Posts: 639
Default

On mythbusters they said the bursting pressure was 90 psi. I saw once where someone built in a pressure release valve, but I can't find it now. They used a needle valve and everything.
__________________
Sunsun Pimp Club Member #068
Sugardaddy1979 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 01:53 AM   #7
kevmo911
Planted Tank Guru
 
kevmo911's Avatar
 
PTrader: (32/100%)
Join Date: Sep 2010
Location: Greensboro, NC
Posts: 3,895
Default

I stumbled across this a while back when I found myself intrigued by SodaStream. It's a 5lb cylinder with a reg set at 60 psi. The guy says he's tested it to 90.

http://www.youtube.com/watch?v=y7L_dxtOCZI

edit - he also mentions that he picked up the cap and quick-release for 6 bucks shipped Evilbay. Not the same as pictured above.

Last edited by kevmo911; 02-08-2013 at 02:12 AM.. Reason: btw
kevmo911 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 04:59 AM   #8
Simpsoid
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Australia
Posts: 16
Default

Could you specify the name of th eitem I would be looking at on electronic purchase bay?

Like "reusable CO2 bottle lids" or something like that. Thanks.
Simpsoid is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 05:04 AM   #9
stevenjohn21
Wannabe Guru
 
PTrader: (12/100%)
Join Date: May 2012
Location: Atlanta
Posts: 1,112
Default

So if the average pop bottle can hold 90psi and you use one of those caps, could you "refill" the pop bottle with a pressurized C02 setup ? That would be way better than mixing sugar and yeast every 2 weeks !
__________________
“We didn’t underestimate them. They were just a lot better than we thought.” -Bobby Robson

“Football is a simple game; 22 men chase a ball for 90 minutes and at the end, the Germans win.” -Gary Linekar

"Some people are on the pitch! They think it's all over! It is now, it's four!" -Kenneth Wolstenholme
stevenjohn21 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 06:13 AM   #10
Yankee
Planted Tank Obsessed
 
Yankee's Avatar
 
PTrader: (1/100%)
Join Date: Jan 2013
Location: Oregon
Posts: 321
Default

Quote:
Originally Posted by Simpsoid View Post
Could you specify the name of th eitem I would be looking at on electronic purchase bay?

Like "reusable CO2 bottle lids" or something like that. Thanks.
I'd like to know this as well. Very nice find! So you would put 2 airline tubes into a T-valve and then connect the end of the hose to a NV? Seems pretty easy.
Yankee is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 08:48 AM   #11
Darkblade48
Moderator
 
Darkblade48's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2008
Location: Toronto
Posts: 8,766
Default

Quote:
Originally Posted by stevenjohn21 View Post
So if the average pop bottle can hold 90psi and you use one of those caps, could you "refill" the pop bottle with a pressurized C02 setup ? That would be way better than mixing sugar and yeast every 2 weeks !
I'm not quite sure I understand the point of this; wouldn't you have a pressurized system that you could use instead of this?
__________________
Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 12:09 PM   #12
stevenjohn21
Wannabe Guru
 
PTrader: (12/100%)
Join Date: May 2012
Location: Atlanta
Posts: 1,112
Default

Are you telling me that you have 1 pressurized system that runs multiple tanks ? If so then thats great, but for me i have 1 pressurized system in a room and a DIY C02 running in a different room ..... hence it would be great if i could just refill my pop bottle from my pressurized system.
__________________
“We didn’t underestimate them. They were just a lot better than we thought.” -Bobby Robson

“Football is a simple game; 22 men chase a ball for 90 minutes and at the end, the Germans win.” -Gary Linekar

"Some people are on the pitch! They think it's all over! It is now, it's four!" -Kenneth Wolstenholme
stevenjohn21 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 01:16 PM   #13
Sugardaddy1979
Sic em
 
Sugardaddy1979's Avatar
 
PTrader: (12/100%)
Join Date: Jan 2012
Location: Athens, GA
Posts: 639
Default

I don't think that would work. You could potentially refill your own paintball can I guess. Or use a manifold and run to your other tank, but I don't know close to enough about pressurized to tell you how to do either. We were talking about the psi a soda bottle can hold related to controlling the co2 out of a diy system.
__________________
Sunsun Pimp Club Member #068
Sugardaddy1979 is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 03:42 PM   #14
DarkCobra
Planted Tank Guru
 
DarkCobra's Avatar
 
PTrader: (5/100%)
Join Date: Jun 2004
Location: Baton Rouge, LA
Posts: 3,349
Default

I'm happy with my current method of making caps, but I think I'll get one of these to play with anyway. Thanks for the heads-up!

I agree refilling a 2L bottle from pressurized CO2 wouldn't work. At 90PSI, CO2 is still in the gaseous state, which is FAR less dense than CO2 in the liquid state as found in a pressurized tank at 800PSI. So it really won't hold much CO2. And as you use it, the pressure would constantly be dropping, so you'd need a regulator to ensure a constant flow - for a setup that would probably run less than a day. Plus, while a brand new soda bottle may reliably survive a one-time pressurization to 90PSI, I definitely wouldn't do it on a day-to-day basis!

But this has me wondering about something else. I've heard you cannot drive an "atomic" style diffuser with DIY. Why not?
DarkCobra is offline   Reply With Quote Quick reply to this message
Old 02-08-2013, 05:09 PM   #15
estill
Algae Grower
 
PTrader: (3/100%)
Join Date: Jan 2007
Location: Tacoma, Washington
Posts: 25
Default

One of my other "hobbies" is making soda. I use the tire valve stem into a 2l bottle cap method for carbonation.

I usually set my regulator around 80 PSI to carbonate the soda. My regulator is a cheap tool regulator, so I really don't know how accurate it is.

As for of filling a 2l with pressurized CO2, I doubt it would last more than a day. You probably would get the same effect as tapping a bottle of seltzer water.
estill is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:04 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012