No bubbles coming out when solenoid is turned on in the morning. Need your help.
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 01-30-2013, 06:48 PM   #1
AlanLe
Gurus Master
 
PTrader: (4/100%)
Join Date: Jan 2013
Location: San Jose, CA
Posts: 795
Default

No bubbles coming out when solenoid is turned on in the morning. Need your help.


Quick question about my regulator. I'm running at 35 psi, 4 bps. However there is no bubble in the bubble counter when the solenoid powers on in the morning. I have to adjust/increase the dial on the bubble counter for it to run. Could it be due to a bad needle?

Thanks,
Alan
AlanLe is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-30-2013, 07:39 PM   #2
Driftmunky
Newbie
 
PTrader: (0/0%)
Join Date: Jan 2012
Location: Santa Paula,CA
Posts: 2
Default No bubbles coming out when solenoid is turned on in the morning. Need your help.

Mine usually takes a few minutes to pressurize. It's not working even after a few minutes?
Driftmunky is offline   Reply With Quote
Old 01-30-2013, 08:11 PM   #3
KTern
Algae Grower
 
KTern's Avatar
 
PTrader: (2/100%)
Join Date: Mar 2012
Location: California
Posts: 61
Default

if you are running an atomizer it takes a few min for it to start.
KTern is offline   Reply With Quote
Old 01-30-2013, 08:22 PM   #4
AlanLe
Gurus Master
 
PTrader: (4/100%)
Join Date: Jan 2013
Location: San Jose, CA
Posts: 795
Default No bubbles coming out when solenoid is turned on in the morning. Need your help.

I waited for 30 mins and still no bubbles. I also tested for leakage and unit was fine.
AlanLe is offline   Reply With Quote
Old 01-30-2013, 08:28 PM   #5
AlanLe
Gurus Master
 
PTrader: (4/100%)
Join Date: Jan 2013
Location: San Jose, CA
Posts: 795
Default No bubbles coming out when solenoid is turned on in the morning. Need your help.

The unit work fine if i turn off the solenoid and turn it back on right away. The problem occurs when the solenoid has been turned off for long period if time (overnight).
AlanLe is offline   Reply With Quote
Old 01-30-2013, 10:22 PM   #6
kevmo911
Planted Tank Guru
 
kevmo911's Avatar
 
PTrader: (32/100%)
Join Date: Sep 2010
Location: Greensboro, NC
Posts: 3,895
Default

I'd try an increase to 40-45 psi. If you continue to have problems, I'd say it's a leak you haven't yet found. check valves and the bubble counter are the most common culprits.
kevmo911 is offline   Reply With Quote
Old 01-30-2013, 11:24 PM   #7
AlanLe
Gurus Master
 
PTrader: (4/100%)
Join Date: Jan 2013
Location: San Jose, CA
Posts: 795
Default

Quote:
Originally Posted by kevmo911 View Post
I'd try an increase to 40-45 psi. If you continue to have problems, I'd say it's a leak you haven't yet found. check valves and the bubble counter are the most common culprits.
I already checked for leakage and didn't spot anything. I dont know why the system comes alive after I increased the needle valve.
AlanLe is offline   Reply With Quote
Old 01-30-2013, 11:26 PM   #8
TwoTacoCombo
Planted Tank Obsessed
 
PTrader: (16/100%)
Join Date: Apr 2012
Location: Los Angeles, CA
Posts: 403
Default

Quote:
Originally Posted by AlanLe View Post
The unit work fine if i turn off the solenoid and turn it back on right away. The problem occurs when the solenoid has been turned off for long period if time (overnight).
Does the solenoid make a different sound the first time it opens compared to when you manually reset it? Sounds like something is sticking inside.
TwoTacoCombo is offline   Reply With Quote
Old 01-31-2013, 01:30 AM   #9
Darkblade48
Moderator
 
Darkblade48's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2008
Location: Toronto
Posts: 9,203
Default

Quote:
Originally Posted by TwoTacoCombo View Post
Does the solenoid make a different sound the first time it opens compared to when you manually reset it? Sounds like something is sticking inside.
No, the solenoid should sound the same all the time. It is just a plunger opening/closing, after all.

Perhaps there is some debris inside that is preventing the solenoid from opening/closing? You can try blowing it out with some blasts from your CO2 cylinder.
__________________
Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline   Reply With Quote
Old 01-31-2013, 07:25 AM   #10
AlanLe
Gurus Master
 
PTrader: (4/100%)
Join Date: Jan 2013
Location: San Jose, CA
Posts: 795
Default

Quote:
Originally Posted by Darkblade48 View Post
No, the solenoid should sound the same all the time. It is just a plunger opening/closing, after all.

Perhaps there is some debris inside that is preventing the solenoid from opening/closing? You can try blowing it out with some blasts from your CO2 cylinder.
I did another timer testing.

1) power off solenoid and power on right away --> unit works correctly/ bubbles are visible in bubble counter.
2) power off solenoid for 10 minutes then power on --> no bubbles in bubble counter.

So what I do to get the system run again in the morning after the solenoid powers on is to increase the needle valve to give system a little jump start then I turn the needle valve back down to the desired bps count.
AlanLe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:15 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012