Finnex PAR - Am I reading it right?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Sponsors > Finnex / Schuber Wright


Reply
 
Thread Tools Display Modes
Old 01-15-2013, 05:53 PM   #1
lullafishi
Planted Tank Obsessed
 
lullafishi's Avatar
 
PTrader: (7/100%)
Join Date: Dec 2012
Location: Grand Rapids, MI
Posts: 317
Default

Finnex PAR - Am I reading it right?


Hey guys!

This may be an easy or obvious question, but I just want to make sure before I pull the trigger.

I'm interested in getting a Fugeray for my first 40b set-up, and I cannot figure out if the "depth" in the Finnex PAR chart is from top/light to bottom/substrate, or if it's the depth of the tank as in front-to-back dimension?

If my tank's dimensions are 36" x 18" x 16" tall, with 2" legs on the light and about 2" of substrate, what will the PAR be for a 36" fugeray?

Is it high 50 PAR or mid-high 40 PAR?

I want low-medium light with no C02 and occasional ferts. Will this be too high light, and if so, will using a glass top or screen mesh help bring it to a level where I won't have problems without C02? I'm not interested in suspending the light at this time.

Thanks!
Attached Thumbnails
Click image for larger version

Name:	finnex-help.jpg
Views:	120
Size:	182.3 KB
ID:	67354  

lullafishi is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-15-2013, 06:16 PM   #2
nvladik
Planted Tank Enthusiast
 
PTrader: (14/100%)
Join Date: Jan 2012
Location: New York
Posts: 735
Default

It's high 50... the vertical marks on the chart are height, specifically form the LED's themselves to the substrate.
__________________
NIKON pimp #017
Sump pimp #014
nvladik is offline   Reply With Quote
Old 01-15-2013, 08:39 PM   #3
lullafishi
Planted Tank Obsessed
 
lullafishi's Avatar
 
PTrader: (7/100%)
Join Date: Dec 2012
Location: Grand Rapids, MI
Posts: 317
Default

Thanks for clarifying that, nvladik!

Can anyone offer advice about adding mesh screens (what type and how many layers) or a glass top to help bring the PAR down to a more low-medium light for no C02? Or should I start a new thread about this in Lighting?
lullafishi is offline   Reply With Quote
Old 01-15-2013, 08:48 PM   #4
nvladik
Planted Tank Enthusiast
 
PTrader: (14/100%)
Join Date: Jan 2012
Location: New York
Posts: 735
Default

If you can hang the light, I would get a smaller light (like 24") and hang it 6-12" above the tank.
__________________
NIKON pimp #017
Sump pimp #014
nvladik is offline   Reply With Quote
Old 01-16-2013, 04:50 PM   #5
lullafishi
Planted Tank Obsessed
 
lullafishi's Avatar
 
PTrader: (7/100%)
Join Date: Dec 2012
Location: Grand Rapids, MI
Posts: 317
Default

Thanks for the suggestion, but I'm not too keen on suspending a light for this set-up. The tank will be near the tv in our living room and I'm trying to avoid too much light spillage. I also can't find a method of suspending something in an aesthetic manner... wish I could drill into the ceiling but our place is a rental so that's off-limits right now.

I could potentially use a shelving unit to support the suspension, but again, I'd like to avoid a lot of light spillage.
lullafishi is offline   Reply With Quote
Old 01-17-2013, 01:55 PM   #6
jbrady33
Wannabe Guru
 
jbrady33's Avatar
 
PTrader: (14/100%)
Join Date: Jun 2012
Location: Mt Laurel, NJ
Posts: 1,574
Default

From what I have read one layer of regular cheap fiberglass screen from Home Depot or Lowes would reduce light about 40% if I remember correctly. I think Hoppy had a thread where he actually measured this with a par meter, you could search for that.

If it were me I would take the 2 screws out that hold the endcap of the light on, the polycarb lens/shield on the light just slides out of the end. Cut the screen a bit smaller than the shield, slide the shield & screen back into the fixture. Your top can still be open or glass without seeing the screen, but it is in the light to cut down PAR.
__________________
jbrady33 is offline   Reply With Quote
Old 01-18-2013, 01:06 AM   #7
lullafishi
Planted Tank Obsessed
 
lullafishi's Avatar
 
PTrader: (7/100%)
Join Date: Dec 2012
Location: Grand Rapids, MI
Posts: 317
Default

I'll see if I can find the thread you're recommending.

The inserted screen sounds like a great fix for me! Promise it'll be child's play? I've seen how adept you are with modding these fixtures, haha! But really, it sounds like I could handle that, thank you!
lullafishi is offline   Reply With Quote
Old 01-31-2013, 12:38 AM   #8
flipanda
Algae Grower
 
flipanda's Avatar
 
PTrader: (8/100%)
Join Date: Nov 2009
Location: Las Vegas, NV
Posts: 46
Default

Quote:
Originally Posted by nvladik View Post
It's high 50... the vertical marks on the chart are height, specifically form the LED's themselves to the substrate.
if the vertical marks is the distance, what are the horizontal marks for?
flipanda is offline   Reply With Quote
Old 01-31-2013, 02:27 AM   #9
blink
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Feb 2012
Location: Edmonton, Alberta
Posts: 566
Default

Distance to the side from the axis of the light.
blink is offline   Reply With Quote
Old 02-12-2013, 08:59 PM   #10
Ach1Ll3sH33L
Planted Tank Obsessed
 
Ach1Ll3sH33L's Avatar
 
PTrader: (2/100%)
Join Date: Mar 2012
Location: Socal
Posts: 338
Default

keep in mind those par readings are taken in open tanks, with no water. So they dont account for water surface reflection etc. you will have less par than what is shown in the chart, so you may find you dont need to reduce the lighting
__________________
Ach1Ll3sH33L is offline   Reply With Quote
Reply

Tags
40 breeder, 40b, finnex, fugeray, par

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:06 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012