Mini M cover

CPDzeke · 01-13-2013, 10:30 PM

I have a clip on glass led on my ada mini m. Will I be able to use the lid for it? I don't want to buy a lid and have it not fit. Thanks.

tropicalmackdaddy · 01-14-2013, 12:28 PM

Depends on how much space it gives you. Measure the clip, see how much room the lid gives you.

CPDzeke · 01-14-2013, 12:42 PM

I meant the one made by ADA

**shrimpnmoss** · 01-17-2013, 02:11 AM

Go to the goodwill or thrift store. Buy the cheapest old picture frame that is a little bigger than the size that you need. Then go to any Aaron Brothers or any place that frames picture and they can cut it to size for you. (usually for free if you ask nicely) Then sand down the edges so it's not so sharp.

Cheap. Easy. DYI sorta...

CPDzeke · 01-24-2013, 03:27 AM

Bump

01-13-2013, 10:30 PM	#1
CPDzeke Planted Tank Enthusiast (View User Tanks) PTrader: (4/100%) Join Date: Jan 2013 Location: Minnesota Posts: 760	Mini M cover I have a clip on glass led on my ada mini m. Will I be able to use the lid for it? I don't want to buy a lid and have it not fit. Thanks. __________________ Eheim Pimp #542& ADA Gentleman #1 Treeless Mountain V3

01-14-2013, 12:28 PM	#2
tropicalmackdaddy Planted Member (View User Tanks) PTrader: (0/0%) Join Date: Mar 2012 Location: Minneasota usa Posts: 263	Depends on how much space it gives you. Measure the clip, see how much room the lid gives you. __________________ "quantity is a quality all it's own" - Joseph Stalin 60-p "spirit dweller's home"

01-14-2013, 12:42 PM	#3
CPDzeke Planted Tank Enthusiast (View User Tanks) PTrader: (4/100%) Join Date: Jan 2013 Location: Minnesota Posts: 760	I meant the one made by ADA __________________ Eheim Pimp #542& ADA Gentleman #1 Treeless Mountain V3

01-17-2013, 02:11 AM	#4
shrimpnmoss Shrimpsanity (View User Tanks) PTrader: (60/100%) Join Date: Apr 2011 Location: 47° 31' 49" N / 122° 1' 53" W Posts: 3,021	Go to the goodwill or thrift store. Buy the cheapest old picture frame that is a little bigger than the size that you need. Then go to any Aaron Brothers or any place that frames picture and they can cut it to size for you. (usually for free if you ask nicely) Then sand down the edges so it's not so sharp. Cheap. Easy. DYI sorta... __________________ \|ShrimpTech\|v1\|v2\|v3\|v4\|

01-24-2013, 03:27 AM	#5
CPDzeke Planted Tank Enthusiast (View User Tanks) PTrader: (4/100%) Join Date: Jan 2013 Location: Minnesota Posts: 760	Bump __________________ Eheim Pimp #542& ADA Gentleman #1 Treeless Mountain V3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode