UK Co2 regulator for US paintball tank.

**sonicpath** · 12-30-2012, 07:41 AM

What kind of connector should I use for this setup?

**Bettatail** · 12-30-2012, 07:50 AM

if it is UK flat nose stem type connector, (not the bullnose type), you can connect the regulator to the US standard co2 tank directly, works but not recommend.

to paintball, an CGA320 to paintball adapter.

**sonicpath** · 12-31-2012, 05:24 PM

Quote:

Originally Posted by Bettatail

if it is UK flat nose stem type connector, (not the bullnose type), you can connect the regulator to the US standard co2 tank directly, works but not recommend.

to paintball, an CGA320 to paintball adapter.

thanks bro

12-30-2012, 07:41 AM	#1
sonicpath Planted Member (View User Tanks) PTrader: (13/100%) Join Date: Aug 2012 Location: New York City Posts: 298	UK Co2 regulator for US paintball tank. What kind of connector should I use for this setup?

12-30-2012, 07:50 AM	#2
Bettatail Wannabe Guru (View User Tanks) PTrader: (79/98%) Join Date: Feb 2009 Location: San Francisco Posts: 1,940	if it is UK flat nose stem type connector, (not the bullnose type), you can connect the regulator to the US standard co2 tank directly, works but not recommend. to paintball, an CGA320 to paintball adapter. __________________ The Metering(Needle) Valve Selection for CO2 Pressurized System Complete Leak check, Double Stage Regulator Pressurized system CO2 safety, Read! Canon Pimp Club #17

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode