New Finnex High Powered LED Fixture. Input Welcome. - Page 6
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Sponsors > Finnex / Schuber Wright


Reply
 
Thread Tools Display Modes
Old 08-14-2012, 06:37 PM   #76
eeng168
Planted Tank Enthusiast
 
PTrader: (99/100%)
Join Date: Apr 2005
Location: NYC, NY
Posts: 773
Default

My opinion...

If this was addressed in the thread earlier, sorry...I didn't bother reading, just jumped to the end.

I recently bought the 36" DS...

Pros: its slick and thin, lightweight and bright.

semi-Con: the brackets can't be used on an acrylic tank because my tank is enclosed on the top.

I have a 50 gallon which is 36" wide x15" x 18" (or something like that) high.
So, when I put the light in the middle...I feel the back and the front doesn't get enough light.


Then again, before this I was using two 36" 96w Coralife which was probably was overkill. LOL

In all, I really like the Finnex product. I might have to eventually get another one and see how that looks.

Last edited by eeng168; 08-14-2012 at 06:44 PM.. Reason: ....
eeng168 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-26-2012, 07:11 PM   #77
Ach1Ll3sH33L
Planted Tank Obsessed
 
Ach1Ll3sH33L's Avatar
 
PTrader: (2/100%)
Join Date: Mar 2012
Location: Socal
Posts: 339
Default

Ive had a 36" ray 2 over my 12 gallon long tank for only a week and my plant's are doing remarkable, look much healthier than when they were under t5-ho lights, couldn't be happier! now time to save for a 24" ray 2
Thanks Finnex!
__________________
Ach1Ll3sH33L is offline   Reply With Quote Quick reply to this message
Old 08-26-2012, 07:43 PM   #78
temple2101
Planted Member
 
PTrader: (4/100%)
Join Date: Jun 2012
Location: IN - USA
Posts: 157
Default

Quote:
Originally Posted by nokturnalkid View Post
On the next run of fixtures, you should make them able to be hung without drilling into the fixture amd voiding the warranty. Maybe something like a nut that is welded to the top of the fixture and all the user would have to do is screw in some supplied eye bolts. Or, something that will slide into where the legs go. If you cam make an affordable dimming fixture, then hanging a fixture isn't that big of a deal.
+1. I figured out a way to hang my 24" Ray 2 without drilling. Pretty easy, but it would also be easy (with the right tools) to make a plastic bracket that would slide in where the legs do. Could even sell it as an extra. I'd pay for it.
temple2101 is offline   Reply With Quote Quick reply to this message
Old 08-28-2012, 04:28 PM   #79
Lowe
Finnex
 
Lowe's Avatar
 
PTrader: (2/100%)
Join Date: Nov 2011
Location: Chicago
Posts: 655
Default

Quote:
Originally Posted by Ach1Ll3sH33L View Post
Ive had a 36" ray 2 over my 12 gallon long tank for only a week and my plant's are doing remarkable, look much healthier than when they were under t5-ho lights, couldn't be happier! now time to save for a 24" ray 2
Thanks Finnex!

__________________

Lowe is offline   Reply With Quote Quick reply to this message
Old 08-28-2012, 04:28 PM   #80
Lowe
Finnex
 
Lowe's Avatar
 
PTrader: (2/100%)
Join Date: Nov 2011
Location: Chicago
Posts: 655
Default

Quote:
Originally Posted by temple2101 View Post
+1. I figured out a way to hang my 24" Ray 2 without drilling. Pretty easy, but it would also be easy (with the right tools) to make a plastic bracket that would slide in where the legs do. Could even sell it as an extra. I'd pay for it.
We are looking in to it at the moment! Seeing what our guys come up with!
__________________

Lowe is offline   Reply With Quote Quick reply to this message
Old 10-21-2012, 01:05 PM   #81
spidernids
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Addis, Louisiana
Posts: 43
Default

Any update on the more advanced Ray 2????? I am anxiously waiting.
spidernids is offline   Reply With Quote Quick reply to this message
Old 10-22-2012, 11:58 AM   #82
jbrady33
Wannabe Guru
 
jbrady33's Avatar
 
PTrader: (14/100%)
Join Date: Jun 2012
Location: Mt Laurel, NJ
Posts: 1,585
Default

Enclosed top tanks - on the plastic brackets, the inner flange is removable, kinda slides out. If you take that off, get rid of the clear screws, and adjust the slides so that the outer flange hangs over the edge, you'll be good!

if it were me, I would then put one drop of super glue on one slide on each side, just enough to keep it from moving wider, not so much that I couldn't break it loose if I needed to later.
__________________
jbrady33 is offline   Reply With Quote Quick reply to this message
Old 12-18-2012, 05:38 PM   #83
Phusis_Eidos
Algae Grower
 
Phusis_Eidos's Avatar
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: North Jersey USA
Posts: 62
Lightbulb

I am in the planning stage for a 60p scape. I am almost convinced to go with the RayII 7k fixture, but I am concerned it will be to much light and algae issues will arise. From what I have researched too much light can be very destructive.

Anyone have thoughts on this?
My plant list includes
1. Hemianthus Callitrichoides
2. Ammania Sp. "Bonsai"
3. Fissidens Fontanus
4. Taxiphyllum Sp. "Flame moss"

On a side note I would love to see the previously mentioned upgrades as I would be 100% convinced . One Idea might be to take a plastic privacy film and place it on the fixture to diffuse the light more?

Thanks !
__________________
ADA 60P Journal

"Natures
Form"

Phusis_Eidos is offline   Reply With Quote Quick reply to this message
Old 12-18-2012, 07:21 PM   #84
jbrady33
Wannabe Guru
 
jbrady33's Avatar
 
PTrader: (14/100%)
Join Date: Jun 2012
Location: Mt Laurel, NJ
Posts: 1,585
Default

The algae issue will be directly related to the height of the light off the substrate. I believe a 60 p is 12" deep and 24" wide. A 24" Ray2 is kicking out 74 PAR at that depth, you better be injecting Co2 unless you want an algae farm.

A FugeRay light of the same size is 45 PAR at that depth, Co2 would still be a good idea but you could get away with Excel/glut dosing.

With either light you could raise it higher (hang it instead of mounted on the tank) or use window screening to cut down the light. If I were going the screening route I would take the end cap off the Finnex light and slide the screen inside the plexi splash shield.

(Sorry Lowe - had to add something involving taking it apart )


PS: From what I understand the HC and bonsai are going to require real Co2 injection to grow well, never tried myself.
__________________

Last edited by jbrady33; 12-18-2012 at 07:23 PM.. Reason: added info
jbrady33 is offline   Reply With Quote Quick reply to this message
Old 12-18-2012, 11:47 PM   #85
Phusis_Eidos
Algae Grower
 
Phusis_Eidos's Avatar
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: North Jersey USA
Posts: 62
Default

Quote:
Originally Posted by jbrady33 View Post
The algae issue will be directly related to the height of the light off the substrate. I believe a 60 p is 12" deep and 24" wide. A 24" Ray2 is kicking out 74 PAR at that depth, you better be injecting Co2 unless you want an algae farm.

A FugeRay light of the same size is 45 PAR at that depth, Co2 would still be a good idea but you could get away with Excel/glut dosing.

With either light you could raise it higher (hang it instead of mounted on the tank) or use window screening to cut down the light. If I were going the screening route I would take the end cap off the Finnex light and slide the screen inside the plexi splash shield.

(Sorry Lowe - had to add something involving taking it apart )


PS: From what I understand the HC and bonsai are going to require real Co2 injection to grow well, never tried myself.
Thanks! I have a everything for a pressurized C02 System so that is not a problem.
The 60P is 14" high and I am assuming the Finnex fixture sits about .5 to 1" above the tank given how it connects. Regarding Par and plant requirements, how does one determine what is sufficient? Take HC, it has a high light requirement, but there is varying opinions as to what range "high" falls into. Where would someone even begin to suggest a range if not from a scientist?
Tropicas website and other companies that grow aquatic plants must have a range they work with as a base. A par of 45 or 100 is a huge difference. I feel like I am shooting in the dark with this.
Lastly if I am to grow plants that are several inches above the substrate the par will increase. How do I keep GSA and other algae from affecting those plants?

I greatly appreciate everyone's advice! This community has helped me so much
__________________
ADA 60P Journal

"Natures
Form"

Phusis_Eidos is offline   Reply With Quote Quick reply to this message
Old 12-19-2012, 09:05 PM   #86
TexasCichlid
Surrounded by Blyxa
 
TexasCichlid's Avatar
 
PTrader: (27/100%)
Join Date: Jul 2011
Location: Texas
Posts: 1,506
Default

Quote:
Originally Posted by Phusis_Eidos View Post
I am in the planning stage for a 60p scape. I am almost convinced to go with the RayII 7k fixture, but I am concerned it will be to much light and algae issues will arise. From what I have researched too much light can be very destructive.

Anyone have thoughts on this?
My plant list includes
1. Hemianthus Callitrichoides
2. Ammania Sp. "Bonsai"
3. Fissidens Fontanus
4. Taxiphyllum Sp. "Flame moss"

On a side note I would love to see the previously mentioned upgrades as I would be 100% convinced . One Idea might be to take a plastic privacy film and place it on the fixture to diffuse the light more?

Thanks !
Ray II would be fine. Stay on top of your CO2 or you will regret it.
TexasCichlid is offline   Reply With Quote Quick reply to this message
Old 12-20-2012, 01:18 AM   #87
NyteBlade
Planted Tank Enthusiast
 
NyteBlade's Avatar
 
PTrader: (42/100%)
Join Date: Aug 2006
Location: Cincinnati, Ohio
Posts: 753
Default

Is there any info on how the Ray 2's compare to T5HO lighting? For example, for a 24" fixture, would the Finnex Ray 2 be more or less PAR than an equivalent 24" 2x24watt T5HO fixture?
__________________
Chris
Canon Pimp #20
NyteBlade is offline   Reply With Quote Quick reply to this message
Old 12-21-2012, 09:51 PM   #88
Green_Flash
Wannabe Guru
 
PTrader: (7/100%)
Join Date: Apr 2012
Location: United States
Posts: 1,745
Default

My #1 want feature for this fixture:

Dimmible

w/o that I would walk and look for something else.

This is highly important so I can adjust brightness to my plants need.
this is what makes LED lighting great.
Green_Flash is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:19 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012