DIY CO2 Diffuser
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 12-10-2012, 12:19 PM   #1
Sakuras
Algae Grower
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: Singapore
Posts: 68
Default

DIY CO2 Diffuser


Hello!
I was wondering if the bell method for diffusing diy co2 would and was also wondering how efficient it is. I cant find any glass diffusers and most probably will not buy a powerhead or filter for the diffusing. Any other method for diffusing would be appreciated as i want to have HC and dwarf hairgrass carpets.

Thanks for reading this.
Sakuras is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-10-2012, 01:42 PM   #2
Merth
Planted Tank Enthusiast
 
PTrader: (17/100%)
Join Date: Sep 2012
Location: Denham Springs, La
Posts: 759
Default

I use the syringe method...bout as cheap as it gets!
Merth is offline   Reply With Quote
Old 12-10-2012, 02:40 PM   #3
hobos
Algae Grower
 
hobos's Avatar
 
PTrader: (0/0%)
Join Date: Feb 2012
Location: Ottawa Canada
Posts: 120
Default

Here is a link to the diffuser I use , it’s ok some people might not like the noise. instead of running the tube in directly I put an air stone on the end of the tube and placed that inside the Elite it makes smaller bubbles which are then passed through the impeller and chewed up further

http://youtu.be/liuXWQcJCcU
hobos is offline   Reply With Quote
Old 12-11-2012, 02:15 AM   #4
Sakuras
Algae Grower
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: Singapore
Posts: 68
Default

Quote:
Originally Posted by hobos View Post
Here is a link to the diffuser I use , itís ok some people might not like the noise. instead of running the tube in directly I put an air stone on the end of the tube and placed that inside the Elite it makes smaller bubbles which are then passed through the impeller and chewed up further

http://youtu.be/liuXWQcJCcU
I cant find the elite filter at my LFS. so i cant use this method.
Sakuras is offline   Reply With Quote
Old 12-11-2012, 03:35 AM   #5
Smellydeli
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: NYC
Posts: 22
Default

Disposable wood chopstick shoved into the tubing.
Smellydeli is offline   Reply With Quote
Old 12-11-2012, 04:24 AM   #6
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (74/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,658
Default

Quote:
Originally Posted by Sakuras View Post
I cant find the elite filter at my LFS. so i cant use this method.
It doesn't need to be the Elite filter. Any very small internal filter - powerhead with a plastic filter chamber attached on the inlet - will work just as well. Bigger ones also work, but are more of a visual problem in the tank. I use one made from a spare filter I had laying around, which isn't even sold anymore. See http://www.plantedtank.net/forums/sh...10&postcount=2
__________________
Hoppy
Hoppy is offline   Reply With Quote
Old 12-16-2012, 05:25 AM   #7
Sakuras
Algae Grower
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: Singapore
Posts: 68
Default

Can it work with a HOB filter?
Sakuras is offline   Reply With Quote
Old 12-16-2012, 05:45 AM   #8
R.sok
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Sep 2012
Location: wa state
Posts: 362
Default

I use a wooden chopstick, just break off the tip piece & stick it in the the tubing, then put it by the intake of the filter.

Oh & a lot of people complain about a white fuzz that starts to get at the end of the chopstick or diy diffuser with diy c02...... I used to have that problem But then What I did was run the airline tubing to a hard plastic tubing, then into the chopstick..now No problems of buildup what so ever, been going off the same batch of c02 for 1 1/2 months now
R.sok is offline   Reply With Quote
Old 12-16-2012, 07:09 AM   #9
Sakuras
Algae Grower
 
PTrader: (0/0%)
Join Date: Dec 2012
Location: Singapore
Posts: 68
Default

Quote:
Originally Posted by R.sok View Post
I use a wooden chopstick, just break off the tip piece & stick it in the the tubing, then put it by the intake of the filter.

Oh & a lot of people complain about a white fuzz that starts to get at the end of the chopstick or diy diffuser with diy c02...... I used to have that problem But then What I did was run the airline tubing to a hard plastic tubing, then into the chopstick..now No problems of buildup what so ever, been going off the same batch of c02 for 1 1/2 months now
Yes i had that white stuff on my sillicone tubing as well. I've just tried putting it into my HOB filter and the blade is chopping up to tiny bubbles. This method looks pretty good to me.
Sakuras is offline   Reply With Quote
Old 12-27-2012, 10:06 AM   #10
tbonedeluxe
Planted Tank Enthusiast
 
tbonedeluxe's Avatar
 
PTrader: (111/100%)
Join Date: Mar 2008
Location: CHICAGO,IL
Posts: 503
Default

A gas separator/bubble counter will eliminate
the white slime from getting into the tank.
Some ideas for you guys.
http://www.bing.com/images/search?q=...ator&FORM=AWIR
tbonedeluxe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:06 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012