|
||||||||||||||||
|
||||||||||||||||
|
|
#1 |
|
Impulse Tank Buyer
|
What's this annoying stuff?
Tried reducing the number of hours my lights are on, increasing flow, water parameters are spot on, etc. I'm at a loss. I can manually remove it, the cherries won't touch it, but the Amanos will a little. Help?
![]()
__________________
![]() |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Planted Member
|
rhizoclorym. I have that same exact stuff. I'm combating it with water changes and and manually removing as much as possible. It's helping a little. Perhaps maybe a blackout? Sorry I'm not much of help just know that you're not alone with this stuff....
__________________
|
|
|
|
|
|
#3 |
|
Obsessed? Maybe
|
minicrazy: Could you tell us a bit more about the tank?
All equipment used, specifics about lighting, ferts added, etc. Are you using pressurized CO2? How long has the tank been running?
__________________
|
|
|
|
|
|
#4 | |
|
Impulse Tank Buyer
|
Quote:
12g Long Finnex PX-360 canister filter Aquatek Mini on a 20oz CO2 tank (3 BPS) BuildMyLED 36" fixture dimmed all the way down and running for 7 hours No ferts 25% water change 3x week Water parameters are spot on 1 Month old
__________________
![]() |
|
|
|
|
|
|
#5 |
|
Planted Member
|
|
|
|
|
|
|
#6 |
|
Planted Member
|
ottos like brown diatom algae. This stuff is not that. It's fuzzy-looking, comes off plants and stuff easily.
__________________
|
|
|
|
|
|
#7 |
|
Enginerd
|
Looks a bit like Rhizoclonium to me, too. I had an outbreak of this when I first set my tank up back in Sep. (The stuff I had was in larger tufts, though.) After trying I all I could to get rid of it, I used Algaefix and got rid of it forever.
Last edited by sessionthree; 11-30-2012 at 02:00 AM.. Reason: edit |
|
|
|
|
|
#8 |
|
Impulse Tank Buyer
|
Worth meantioning- I have 3 ottos in this tank.
__________________
![]() |
|
|
|
|
|
#9 |
|
Obsessed? Maybe
|
Part of the problem is that your tank is relatively new.
Your lack of filtration also likely lends itself to some problems. Are you able to get a better canister filter? Part of it looks like it could be a build up of random mulm-type gunk. What are your specific water parameters? Why are you changing your water three times per week? Sounds like you've still got quite a bit of lighting. Do you have access to PAR data for the fixture so you can determine your light level? Also should note that bubbles per second isn't an effective way to determine CO2 concentrations. Are you using drop checkers in your tank to help estimate the concentration? Why aren't you providing fertilization if you've got tons of lighting and are using CO2?
__________________
|
|
|
|
|
|
#10 | |
|
Impulse Tank Buyer
|
Quote:
I'm changing the water 3x a week because that's how often I'm vacuuming out that stuff. Normally it would be once a week for me. I'll test a fresh sample tomorrow. There's plenty of filtration, flow is an issue though. It's a 12g long and the spray bar's current only reaches about 75% of the tank. That being said, what ever that stuff growing is, even where the flow is strongest, it's just as thick. I know at 100% the light putting out about 140 PAR at the bottom of my tank. Which is stupidly high hence the dimmer and the reduced photoperiod. My indicator is still on its way from Taiwan and I've been going off of how the plants are responding, ie: pearling and growing like crazy. I tried a week of increased injection with no change. So that aspect is a crapshoot at the moment. And I take back my previous statement, I do dose ferts, but it never crossed my mind they were ferts. I always saw them as "maintenance" items. Those would be flourish trace elements and potassium twice a week.
__________________
![]() |
|
|
|
|
|
|
#11 |
|
Impulse Tank Buyer
|
So tonight I hosted our local planted tank club. I had them take a close look at whats been growing. They think it's a fungus of some kind. I'm going to switch the UV sterilizer from my 20g to this tank on their suggestion and see if it makes a difference.
__________________
![]() |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|