50G with 30G sump - month 10 update
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 07-27-2012, 09:46 PM   #1
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

50G with 30G sump - month 10 update


I will have more to update tomorrow after I pick up the equipment. A friend of mine has graciously offered the use of his tanks/etc while he is out of the country for work (years), so I will be picking up 2-3 10-gallon tanks and one 30-gallon tank (all glass).

Goals
The goals for this tank are as follows:
  1. Learn how to run and enjoy an aquarium
  2. Low maintenance (minimal water changes, fert requirements)
  3. Low-light to save on power costs
  4. Low-tech - remove complication of CO2
  5. Low-cost (relatively, anways)

Water quality
The water, from what I know, is ~pH7 and moderately hard, so what goes in the tank must be able to deal with this - I do not want to deal with changing water chemistry via expensive chemicals.

What's in the tank
Substrate: Mineralized topsoil (AaronT's method) capped with Black Diamond 20/40 blasting grit
Plants: Anubias, Java fern, some type of moss, Rotala, Hygro
Fish: Cherry barb
Inverts: Red cherry shrimp (clean the plants/substrate), Ramshorn snails (clean the glass)

Infrastructure
I would like to experiment with sumps/overflows, but will probably keep things simple to start. 30G on its own and a 10G to breed the RCS. One of the spare 10Gs will be an emergency quarantine tank.

Timeline
  1. Mineralize the topsoil
  2. Lay the mud, then plant everything
  3. 2-3 weeks to cycle
  4. Add the RCS (10-15 to start)
  5. Give it 2-4 weeks for the RCS to get established
  6. Add a school of cherry barbs (~dozen)
  7. Enjoy, maintain, and document progress


More to come, and pictures, of course.

Last edited by crazymittens; 05-31-2013 at 04:07 PM.. Reason: More thoughts added.
crazymittens is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-27-2012, 10:04 PM   #2
jbreyy
Algae Grower
 
jbreyy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2012
Location: United States
Posts: 63
Default

CO2 isn't really a complication. A DIY system takes about ten minutes to build, and only 2 minutes once ever 2 weeks to refill. It's really really worth the "effort". And it's probably the cheapest tank investment you will make.
__________________
jbreyy is offline   Reply With Quote
Old 07-27-2012, 10:16 PM   #3
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Hm, I thought that CO2 encouraged growth, and thus increases maintenance (trimming, etc)?
crazymittens is offline   Reply With Quote
Old 07-27-2012, 10:35 PM   #4
jbreyy
Algae Grower
 
jbreyy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2012
Location: United States
Posts: 63
Default

CO2 does encourage growth, and without it some plants just won't grow at all!! They will die and melt away. You'd have to pick all really easy plants, and expect them to grow really slow without CO2
__________________
jbreyy is offline   Reply With Quote
Old 07-27-2012, 10:38 PM   #5
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Yeap, that's pretty much what I was planning. This is a first tank, after all, so no point in getting 'hard to keep' plants & animals.

If this tank goes well, I will be looking into turning the 30G into a sump for a 100+ gallon tank, and then I would use a CO2 system (with proper overflow to eliminate off-gassing, of course).

Thanks for the input, though, appreciated!
crazymittens is offline   Reply With Quote
Old 07-28-2012, 08:41 PM   #6
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Well, quick update. I've picked up all the bits and pieces my friend was giving me, and wow...this will take all weekend just to inventory. Pretty much everything you could want to run salt and fresh water tanks.

On the soil front, I've started the rinse process (some pics to follow). Questions to post in the substrate forum.

The blasting grit is a no-go - two different shops, one promising Black Diamond, one promising Black Beauty, both supply something made locally out of nickel slag - pretty sure that is toxic to any living thing out there, nevermind fish. So to avoid wasting more time hunting this stuff down, we're just biting the bullet and ordering some Fluorite Black or something. Anyways, I have a $12 toxic (and 88lb) lesson sitting in my garage: Ask questions, even if you feel you're inconveniencing people!
crazymittens is offline   Reply With Quote
Old 08-07-2012, 02:17 AM   #7
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

After a lengthy thread in the Equipment forum, back to posting here.

The budget has taken a beating, but we're still pretty much on-track. Just ordered the diamond hole-saws, bulkheads, loc-line for the returns, and black Flourite gravel.

Also, I picked up a 50G the other day off Kijiji, so now we're doing that as the display, and the 30G is the sump. More info tomorrow.
crazymittens is offline   Reply With Quote
Old 08-07-2012, 10:05 AM   #8
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Sump design has been finalized - initial drainage onto coarse filter media (this will be periodically removed for cleaning), and then flowing onto 2-3 trays (egg-crating) of pot scrubbies. Water then flows under/over a set of baffles and into the pump/heater area for return to the display tank. Hopefully 20 gallons contained in the sump.

Tank overflow design is still coast-to-coast, although I may leave 3" on either end to avoid having the returns punching through. Have to see what glass costs before I make that call.

We ran our driftwood through the dishwasher yesterday, looks nice and clean. My wife will be putting it together into a nice display piece, moss and anubias will be tied to it.

After meeting the some local aquarium enthusiasts (http://www.dras.ca) the other day, they suggested that I speak to the owner of 'Menagerie', an LFS with a good reputation for plants. Will be calling him this week.

I had really hoped to get some Black Diamond blasting grit, but everyone around here uses a local company's stuff that is made from nickel slag. Since nickel slag dust is poisonous to humans, I can only assume it'll kill fish/plants, too. I will post a quick question in the substrate forum to confirm.

Finally, today will be the first full day of sun on the MTS (I unfolded the tarp and spread it out before work), so hopefully its dry and ready for a re-soaking.

Pictures will go up later.
crazymittens is offline   Reply With Quote
Old 08-07-2012, 12:20 PM   #9
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Here's the link to the Equipment thread, for future reference: http://www.plantedtank.net/forums/sh...d.php?t=185703

Plumbing documentation/thought process here: http://wiki.practicaltech.ca/index.p...arium_plumbing

Other aquarium notes here: http://wiki.practicaltech.ca/index.php/Aquarium
crazymittens is offline   Reply With Quote
Old 08-07-2012, 05:20 PM   #10
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Pics!

The new display tank, 50G, 36x18x18.


The sump, 30G, 36x18x12:


MTS process...





Plexiglas egg-crate ledging & baffles cut.



Driftwood cleansing.

Last edited by crazymittens; 08-07-2012 at 05:30 PM.. Reason: more pics
crazymittens is offline   Reply With Quote
Old 08-07-2012, 05:29 PM   #11
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

Did putting the driftwood in the dish washer work? i just got a piece in the mail that i bought on ebay and want to give it a through cleaning and i was thinking the dishwasher. I was also thinking that it might help leach out the tannins. how did it work?
Jmlampert23 is offline   Reply With Quote
Old 08-07-2012, 05:33 PM   #12
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

I ran them through without soap, of course, on the 'pot scrubber' setting AND the dry cycle. They turned out fine, I think. No clue how they'll do in water yet - no tank to put them in. I may dump them in the tank for the duration of leak testing - that should bring out any tannins that are left. Prior to the wash they sat in a tank of water for ~1.5 weeks.

Got the idea here: http://gwapa.org/wordpress/2009/01/j...ting/#more-366

Summarized:
* Find some in a fast-moving stream
* If not from stream, soak in outdoor pond for a few months to remove tannins and waterlog the wood
* Always use dead wood
* Hardwoods only, nothing you can dent with a fingernail
* No pine/red cedar - toxic
crazymittens is offline   Reply With Quote
Old 08-07-2012, 05:43 PM   #13
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

i think my piece of wood is going to take a bath in the dish washer tonight
Jmlampert23 is offline   Reply With Quote
Old 08-08-2012, 12:28 AM   #14
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

MTS dried out, so re-soaked it and spread it around. Probably keep this up all week and it should be ready for the weekend.

Picked up the egg-crate, silicon, and some of the pipe fittings tonight. I managed to find the unions, but no 'sanitary-tees' in 1" - guessing that's not a standard so not available. This was after three different hardware stores - Lowe's, Home Depot, and Home Hardware (Lowe's had the best selection by far).

I think I'm going to have to up the size to 1.5" as I saw a lot of options for that. There is a Rona near my train station, so will drop by tomorrow after work in a last-ditch attempt. If nothing else, at least I now have a better drainage system (even if it's bottle-necked by the 1" bulkheads).

If I can find 1" 'wye-tee' fittings, then no need to get 1.5". If not...

Pipe shopping list:
  1. 3x 90-degree elbow (1" end fits into bulkhead, 1.25" intake)
  2. 3x 1.5"->1" slip bushing (adapter to go from bulkhead 1" to drain 1.5")
  3. 3x 1.5" sanitary tee (wye-tee eliminates waterfall effect)
  4. 1x 12-18" of 1" PVC (bulkhead inside spacer)
  5. 1x 10' of 1.5" PVC (drains)
  6. 3x 1.5" adapter - slip to male threaded
  7. 3x 1.5" threaded cap
  8. 1x 1.5" true-union ball valve (dual union)
  9. 2x 3/4" 'ball-style' check-valve (returns, non-spring)
  10. 1x 10' of 3/4" PVC (returns)
  11. 2x 3/4" threaded to slip adapter (pump connections)
  12. 4x 3/4" 45-degree elbow (return out of sump)
  13. 2x 3/4" 90-degree elbow (return enters tank)
  14. 1/4" tube x 3/8" NPT fitting
  15. PVC glue/cleaner

Great plumbing intro from FishGuyTV: http://www.youtube.com/watch?v=309UQ...feature=g-vrec

And another good plumbing/sump video: http://www.youtube.com/watch?v=fOkK2...eature=related
crazymittens is offline   Reply With Quote
Old 08-08-2012, 12:27 PM   #15
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

The MTS is coming along nicely...I think...the amount of dirt seems to be shrinking, seems kinda odd.

Ordered my plumbing bits from http://www.flexpvc.com, shipping was a bit much, but its saved me the time/hassle/driving of going to random stores looking/begging for parts.

On top of the stuff mentioned before (thanks to great prices), I got unions for the drains, two ball valves for the drains, ball valves for the returns, and ball check valves for the returns as well. The 'ball style' check valves were definitely not available locally. Also managed to snag some nice red 1/4" tubing and the 'street' 90-degree pieces that were also not available locally.

I do understand that BeanAnimal's page uses 1" bulkheads because that's all he had available, but I'd already ordered the 1" bulkheads when I discovered that 1" PVC has no local supply. Anyway, handy that I can just make a direct shopping list from his page now.

That site also has 'freebies' for different order values. I spent more than $50, so got 520' of 1" teflon tape for free. Cool.

Back to Lowe's tonight to return the pipe fittings and pick up the PVC glue/cleaner.
crazymittens is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:40 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012