|06-02-2012, 02:35 PM||#1|
DIY - Island Paludarium 360° A to Z - 40" x 40" x 28" - 185 Gal
Good day to Europe, I am French more precisely, i'm 26 (in advance thank you to forgive me for my English aproximatif, I use an online translator).
I developed a certain passion for the world of paludariums, I love to imagine and create sets each time different and unique. Thank you to nature for inspiration innépuisable she gives me every time.
I have long wanted to share my creations. I am the author of the project entitled "Waterfall Paludarium" you may have seen on youtube also : Waterfall Paludarium HD 1080p - YouTube
Here is my blog for more details on its construction : Waterfall Paludarium (Project completed)
And I now work for several months on a new project I titled Island Paludarium 360°. I was eager to introduce him.
Here is my blog for more details on its construction : Island Paludarium 360 ° (New Project)
Presentation of the New Project
Project status : Under construction
Type : Paludarium
Size of the tank : 40" x 40" x 28"
NET volume of the tank : 185 Gallon
Closed : Yes
Materials : 8mm glass tank, gallery and wooden furniture OSB
Lightning : 100% LEDs 9x30W
Aeration : Two PC fans (12cmx12cm)
Irrigation : A pump 1300L/h for the system of rain
Cascade/waterfall : A pump 2000L/h
Wave system : Vibration pump 5000L/h
Fogger/mist : 3 Fogger in the waterfall
Type of water : 100% rainwater (not limestone)
Type of scene : Natural & Artificial : Natural Seychelles sand, polyurethane foam rocks covered with waterproof mortar and acrylic paint, driftwood branch, artificial vines
Plants : Terrestrial and epiphytic (gardenia, frangipani, vanilla, ferns, orchids, tillandsia, ficus, helxine, moss)
Planting technique/substrate : Felt geotextile (kept wet by rain system)
Animals : Land hermit crabs (Pagou), drosophila for the atmosphere "gnats", probably snails (Neritina), and can be Agalychnis callidryas and crickets
Height of water : 5 in or 35 gal
TOTAL weight : Approximately 550 lb (including water)
Next step : Getting water, system rain creation, waves, waterfall, and mist
For this third project is an island 360° that I will realize, the tank is glass 8mm thick and 100cm fully closed side, the Seychelles natural sand will form a small island strewn with boulders, covered vegetation, driftwood branches and vines falling from the ceiling fill the space, and will be covered with orchids and moss (lots of moss).
Side vegetation, I will try with specific plants such as frangipani with its beautiful yellow flowers and the famous Flower of Gardenia Tiare Tahitensis, as usual with a database of several varieties of ferns and orchids Vanilla is climbing).
A system of artificial climate will be set up to recreate the rain (and therefore the natural watering of all plants by this technique), the waves will also fail on the outskirts of the island through a pump vibration and the wind that will provide aeration and naturally move the foliage.
For lighting, we go for the 100% LED, ie "High power" of the 30W unit, there will 9x30W ... I would also like to thank kdj2 a parallel forum for his very constructive post on its tests of these LEDs. I left without him definitely on turbo neon. However I have not yet done so to test for these LEDs there, but it will spend the time comes.
Frangipani Plumeria rubra Yellow, Gardenia Tahitensis "Tiare Flower", Orchid Vanilla planifolia,
A dozen mini Orchids varied Driopteris atrata Fern, Ficus Ginseng
Fern Polypodium vulgare, Blechnum fern spicant, Tillandsia Brachycaulus,
Tillandsia Butzii, Areca palm, Ficus punctata Helxine, moss.
Visit my homepage DIY Paludarium's : http://clickerfou.free.fr
Follow me on facebook :
|diy, island, led, paludarium, plants|