Will this work on Fluval Spec???

smellslikefish · 10-15-2011, 03:51 AM

I have repositioned my co2 ceramic diffuser right above the water pump in the small circulation chamber behind my tank, and hope that the pump will suck the bubbles in and blow them out into the water column, so will this work? I am speaking specifically of the Fluval Spec 2 gallon pico tank. where there are two filter-chambers in the back - one for the pump (where I squeezed my diffuser in), and one for the filter media.

PinoyBoy · 10-15-2011, 08:27 AM

Sure does. The powerhead/pump will chop up a good amount of the co2 bubbles and shoot it through out the tank. Just make sure the pump's head doesn't point straight to the surface, otherwise it's just wasted.

10-15-2011, 03:51 AM	#1
smellslikefish Algae Grower (View User Tanks) PTrader: (0/0%) Join Date: Oct 2011 Location: Canada Posts: 27	Will this work on Fluval Spec??? I have repositioned my co2 ceramic diffuser right above the water pump in the small circulation chamber behind my tank, and hope that the pump will suck the bubbles in and blow them out into the water column, so will this work? I am speaking specifically of the Fluval Spec 2 gallon pico tank. where there are two filter-chambers in the back - one for the pump (where I squeezed my diffuser in), and one for the filter media.

10-15-2011, 08:27 AM	#2
PinoyBoy Wannabe Guru (View User Tanks) PTrader: (2/100%) Join Date: Mar 2008 Location: WA, USA Posts: 1,340	Sure does. The powerhead/pump will chop up a good amount of the co2 bubbles and shoot it through out the tank. Just make sure the pump's head doesn't point straight to the surface, otherwise it's just wasted. __________________ -Ged Three 2.5gal -- All plants only 2.5 gal JBJ Picotope 20 gal Long

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode