Paintball Co2 Injection DIY Setup with Tons of Photos - Page 102
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 04-18-2011, 04:01 PM   #1516
rj55021
Algae Grower
 
rj55021's Avatar
 
PTrader: (0/0%)
Join Date: Apr 2011
Location: CANADA
Posts: 80
Default

Quote:
Originally Posted by jmzjmz View Post
Jaggedfury has a great product!

Mine is about to arrive

Will be glad to see my new plants growing like in a farm
rj55021 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 04-20-2011, 07:33 PM   #1517
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

Well my setup has been working great up until today. I got my tank refilled and went to put the ASA on, lost almost all my CO2.

I screw the ASA on to the tank and started to turn the ASA valve down to open the tank, CO2 started rushing out the ASA valve at the top. So I unscrewed it and tried again, lost the rest of the tank.

Is the ASA faulty or what now? I have no idea what to do and really am getting tired of getting refills because of this stupid thing.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-20-2011, 07:45 PM   #1518
Jim Miller
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Dec 2002
Location: Maryland
Posts: 531
Default

O-ring?

Jim
__________________
Jim Miller is offline   Reply With Quote
Old 04-20-2011, 07:49 PM   #1519
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

Quote:
Originally Posted by Jim Miller View Post
O-ring?

Jim
When taking the ASA apart there are two O-rings on the little brass piece itself. It seems to fit awfully loose inside there, but I wasn't that observant before to know if it was or wasn't loose before.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-20-2011, 08:12 PM   #1520
rekles75
Planted Tank Enthusiast
 
rekles75's Avatar
 
PTrader: (104/100%)
Join Date: Feb 2008
Location: Atlanta, GA
Posts: 860
Default

Quote:
Originally Posted by Burks View Post
Well my setup has been working great up until today. I got my tank refilled and went to put the ASA on, lost almost all my CO2.

I screw the ASA on to the tank and started to turn the ASA valve down to open the tank, CO2 started rushing out the ASA valve at the top. So I unscrewed it and tried again, lost the rest of the tank.

Is the ASA faulty or what now? I have no idea what to do and really am getting tired of getting refills because of this stupid thing.

Mines did the same thing. Fury said the little o rings were the problem but I havent been able to get to them. I too am a little frustrated and sick of this setup.
__________________
Thanks,
Rekles75

55 GAL #1---55 GAL #2 ---10 GAL---4 GAL Finnex---ALL SCAPES HAVE BEEN RETIRED.
rekles75 is online now   Reply With Quote
Old 04-20-2011, 08:20 PM   #1521
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

Quote:
Originally Posted by rekles75 View Post
Mines did the same thing. Fury said the little o rings were the problem but I havent been able to get to them. I too am a little frustrated and sick of this setup.
That's a bummer. Guess I'll pull them off and head to Home Depot or something tomorrow. If that doesn't fix it, I'll have a paintball set up for sale.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-20-2011, 08:25 PM   #1522
Jim Miller
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Dec 2002
Location: Maryland
Posts: 531
Default

Why use the adapters with the knob and all the potential leaks? Why not the ones with the fixed pin valve actuator?

Jim
__________________
Jim Miller is offline   Reply With Quote
Old 04-20-2011, 08:27 PM   #1523
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

Quote:
Originally Posted by Jim Miller View Post
Why use the adapters with the knob and all the potential leaks? Why not the ones with the fixed pin valve actuator?

Jim
It's just what I bought from Fury.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-20-2011, 08:55 PM   #1524
Geoscouter
Algae Grower
 
Geoscouter's Avatar
 
PTrader: (1/100%)
Join Date: Feb 2011
Location: St Louis, Mo
Posts: 34
Default

I had same problem. Replaced o rings and now it works fine.
Geoscouter is offline   Reply With Quote
Old 04-20-2011, 09:47 PM   #1525
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

I just teflon taped the crap out of the top part until I can fix it.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-20-2011, 10:37 PM   #1526
accordztech
Wannabe Guru
 
PTrader: (4/100%)
Join Date: Dec 2004
Posts: 1,785
Default

I can't find the thread in this thread on your living and what comes with the packages.
__________________
accordztech is online now   Reply With Quote
Old 04-21-2011, 12:07 AM   #1527
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Quote:
Originally Posted by Burks View Post
I just teflon taped the crap out of the top part until I can fix it.
The O rings are easily replacecable. It's like .58 cents per 3-6 O rings. Part number at Lowes is BrassCraft # 0533. The size is 1/4"ID x 3/8"OD x 1/16" Wall Thickness.



You're dealing with rubber O rings and pressurized gas, overtime it's going to wear out.

The Needle Valve like the Custom Products uses a fixed Pin Valve type Actuator. When it goes bad, the whole entire Needle Valve needs to be replaced. The Custom Product Needle Valve I've used in the past cost $45 dollars + if I remembered correctly. Last thing you want to do it replace the same Custom Product Needle Valve within a year of usuage. Wouldn't the .58 cent or so replacement of the O rings be more better to replace then the Pin Valve Actuator on the higher end ASA Needle Valve.

The setup isn't meant for everybody. Although it works fine and all. I plan to replace my O rings on the depress pin when it comes to my 5 month refill this coming May. It's only .58 cents and think of it like a maintenance type ordeal.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 04-21-2011, 04:40 AM   #1528
accordztech
Wannabe Guru
 
PTrader: (4/100%)
Join Date: Dec 2004
Posts: 1,785
Default

FYI the needle valves sold at home depot are also at OSH. But OSH has them for around 5 bucks. Oh and I commented on how home depot was 15 bucks each, they dropped the price to 10 bucks.

Im trying these stupid valves again.
__________________
accordztech is online now   Reply With Quote
Old 04-21-2011, 03:04 PM   #1529
Burks
Wannabe Guru
 
Burks's Avatar
 
PTrader: (16/100%)
Join Date: May 2006
Location: Crestline, OH
Posts: 1,930
Default

Quote:
Originally Posted by Jaggedfury View Post
The O rings are easily replacecable. It's like .58 cents per 3-6 O rings. Part number at Lowes is BrassCraft # 0533. The size is 1/4"ID x 3/8"OD x 1/16" Wall Thickness.

You're dealing with rubber O rings and pressurized gas, overtime it's going to wear out.
Thanks for the part numbers. That makes it a ton easier. I'll pick some up tonight and also continue to tape the threads every fill up anyways. Might as well double up on leak prevention.

Yeah, I expect things to wear. But after a little under two months of use? Eh...probably just the cheapest O-rings the company could find. Wouldn't surprise me if they were "old stock" to begin with.
__________________
Filstar Pimp #84
Burks is offline   Reply With Quote
Old 04-22-2011, 04:21 AM   #1530
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Shock-Tech uses O rings as well for their depress pin. They sold very high end paintball products as well as the ASA On/Off Valve. The O rings on them are also required to replaced after each weekend game or refill. The company didn't do too good in products and thus resulting in going out of business. Some stores will still sell their ST(Shock-Tech) products, but that doesn't mean just because you pay for higher end ASA On/Off valve that you wouldn't need to replace the O rings.

I believed if you want to go the super duper cheap way, your local paintball store can sell you 100-600 pieces for nearly $5-$8 dollars.

They are just something that needs to be replaced often. I would say it's best to change it every time you refill the tank. In my chase, it's 5-6 months. Even though it might be fine, it's just that extra piece of cents will further lessen prevent a leak for you.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:03 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012