Paintball Co2 Injection DIY Setup with Tons of Photos - Page 11
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 10-01-2010, 10:44 PM   #151
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Ditto. Nice. May it last yall a few thousands years. haha j/k. A few years at least
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-02-2010, 04:59 AM   #152
g33tar
Planted Tank Enthusiast
 
g33tar's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2010
Location: Cumberland, Rhode Island
Posts: 522
Default

Yea it was probably a 1 on a difficulty scale. When in doubt, I just used twice as much teflon tape as I thought was appropriate.

On / off and gauge - 20 dollars shipped
WATTS A-41 needle valve - 5 dollars
Filled 20oz co2 tank - 15 dollars
12ft of tube - 1.80

I cant believe this worked for about 40 dollars. I was expecting it to turn into a missile while I was at work, but its still where I left it.
g33tar is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 05:40 AM   #153
ridewake210
Wannabe Guru
 
PTrader: (21/100%)
Join Date: Jan 2007
Location: Urbana, Illinois
Posts: 1,090
Default

Check out Ebay # 290482260893
__________________
Sean


90g- 4x54w T5HO, Pressurized CO2, XP2 & XP4, Hydor ETH 300w

125g- African Mbuna,Haps, Peacock community tank
x2 Rena XP4s, Hydor ETH 300w, 4x39w Coralife T5NO

Filstar PIMP #165


In the making...15+ more tanks.
Ranging from 5 gallons to 40 gallons.
ridewake210 is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 03:00 PM   #154
twizzle
Algae Grower
 
PTrader: (1/100%)
Join Date: Jun 2010
Location: Holliston MA
Posts: 25
Default

Hello everyone. Great thread,fantastic, well done everyone.

OK here's the deal, I want a co2 unit so badly but i have no clue and need an idiots( Blond)guide to putting one of these great units together.

Can i get everything i need besides the co2 tank at the Home Depot.
Can someone smarter than me (not difficult) write down in just one message a list of parts that i should get as the more i read this great thread the more confused i'm getting and it 's giving me a headache lol. Is it possible for me to get everything i need on feebay ?

Help help help i need my plants to grow...
twizzle is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 03:06 PM   #155
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

You can get the Needle Valve, Co2 Tubing and Teflon Tape at Homedepot.

Co2 Paintball tank, On and Off Valve, and Gauge needs to be bought at Paintball store or Internet.

You will need a way to diffuse the Co2, either through a ceramic diffuser, or a reactor or through a inline canister filter. That can be made, rigged, or bought online.

Parts you need.

- Standard Paintball Co2 Tank with Pin Valve - $20 - $28 depending on tank size. $28 refer to 24oz.

- Any Paintball Co2 On and Off Valve (Make sure it has 2 threaded input slots for Gauge and Needle Valve) $20 -$60 depending on brand.

- Any Paintball Co2 Gauge $5-$10 depending on brand. (Optional to have, only tells you when your Co2 tank is full or not)

- Needle Valve from HomeDepot - $5.99

- Co2 Tubing - $2-4

- Teflon Tape $1.49
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 03:20 PM   #156
twizzle
Algae Grower
 
PTrader: (1/100%)
Join Date: Jun 2010
Location: Holliston MA
Posts: 25
Default

Thank you JaggedFury for quick reply. What PSI does the needle valve have to be, which valve should i get? Everytime i go to the depot i somehow always manage to come home with the wrong stuff. lol

Anyone know of any reasonably priced complete units available anywhere online, plug and play?
twizzle is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 03:33 PM   #157
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

We'll, The ones I'm using from Homedepot (http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053), is listed at 400psi, some of the people here suggest getting higher rated psi needle valve since your Co2 Paintball tank will be at around filled to 850psi. I've have been using the Homedepot needle valve and had no problems, been running a few months now over 9 months. The brand and part number is Watts A-41.

There won't be no complete unit assemble for you, as to this is a something I rigged up. There might be one for sale, but high chance. A member here got the entire thing made for about $40 dollars. Worth a shot, it's very simple to rig up and find parts.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 05:38 PM   #158
g33tar
Planted Tank Enthusiast
 
g33tar's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2010
Location: Cumberland, Rhode Island
Posts: 522
Default

Another tip - make sure you get 1/4 outside diameter and .170 inside diameter hose. I got a smaller inside diameter and once I put the brass fitting in the end of the hose, it wouldn't slide into the needle valve.
g33tar is offline   Reply With Quote Quick reply to this message
Old 10-02-2010, 11:30 PM   #159
Sundance2010
Algae Grower
 
PTrader: (0/0%)
Join Date: Sep 2010
Location: NoCal
Posts: 75
Default

What are some good canister type filters that would be the right size for my 55g aquarium?
Sundance2010 is offline   Reply With Quote Quick reply to this message
Old 10-03-2010, 01:23 AM   #160
NickS
Planted Member
 
NickS's Avatar
 
PTrader: (0/0%)
Join Date: Oct 2009
Location: Plymouth, MI
Posts: 168
Default

g33tar, I had the same problem. But I handled it by running the hose under hot water for a minute and then it slid through just fine.
__________________

"I am rarely happier than when spending an entire day programming my computer to perform automatically a task that it would otherwise take me a good ten seconds to do by hand." DOUGLAS ADAMS, WRITER
NickS is offline   Reply With Quote Quick reply to this message
Old 10-03-2010, 02:42 AM   #161
g33tar
Planted Tank Enthusiast
 
g33tar's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2010
Location: Cumberland, Rhode Island
Posts: 522
Default

Ive got a question for you guys who are experienced with pressurized co2....What is the pattern for the co2 pressure loss? ....like...does the gauge slowly go down to 0 at a steady pace, or does it stay at ~800 then drop off to 0 in the matter of a few days? Im so pumped about this I cant even explain it.
g33tar is offline   Reply With Quote Quick reply to this message
Old 10-03-2010, 04:02 AM   #162
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Quote:
Originally Posted by g33tar View Post
Ive got a question for you guys who are experienced with pressurized co2....What is the pattern for the co2 pressure loss? ....like...does the gauge slowly go down to 0 at a steady pace, or does it stay at ~800 then drop off to 0 in the matter of a few days? Im so pumped about this I cant even explain it.
Mines been running for a couple months and still reads 840-850psi. You will notice it going down but it's going to slowly drop. Like super slow base on your output co2 bubble per second. These setup could easily last you well over 4-6 months, maybe even more. I will let you know when mines hit the 800 psi mark. Give me a few more weeks lol.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote Quick reply to this message
Old 10-03-2010, 04:05 AM   #163
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Quote:
Originally Posted by Sundance2010 View Post
What are some good canister type filters that would be the right size for my 55g aquarium?
Depends on what you have in your tank. I have a Fluval Fx5 on a 55gallon tank. It's an overkill but it does its job and a whole lot more. Tons of room for media options. Can't have enough filtration.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote Quick reply to this message
Old 10-04-2010, 01:34 AM   #164
voyetra8
Algae Grower
 
PTrader: (0/0%)
Join Date: Sep 2010
Location: Los Angeles, CA
Posts: 12
Default

Hey all... I've acquired everything I need to put this system together, except for a needle valve.

For some reason, the Watts A-41 sold at HomeDepot is not available in California - and they won't even ship it to California. I assume it has something to do with our ridiculous "nanny" laws here. Ugh.

I keep searching on eBay, but it's really hard to tell which needle valve will actually work without additional parts, etc.

Can someone please link me a specific eBay auction through a PM or something?

Thanks a ton!
voyetra8 is offline   Reply With Quote Quick reply to this message
Old 10-04-2010, 01:40 AM   #165
CalebD77
Algae Grower
 
PTrader: (0/0%)
Join Date: Sep 2010
Location: Sacramento, CA
Posts: 13
Default

I bought mine in California lol Sacramento.
CalebD77 is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:49 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012