|
||||||||||||||||
|
||||||||||||||||
|
|
|
|
#1 |
|
Algae Grower
|
hey guys I haven't been on much but I have a question about this
.what is the brown furry like substance growing on my plant? my drift wood has very small spots of white ish colored furry also could not get a picture of it thanks |
|
|
|
|
|
#2 |
|
Planted Tank Enthusiast
|
Look like you have an issue with BBA (black brush algae). The white stuff from you DW could be fungus from the wood. You can usually get rid of those with a pleco
|
|
|
|
|
|
#3 |
|
Planted Tank Enthusiast
|
It means you, or a recent owner of that plant have too much light/not enough CO2. It's resulting in BBA which can be killed with spot treatments of H2O2, Fluorish Excel, or glut. However, killing it off won't fix the root issue.
__________________
Always curious.
|
|
|
|
|
|
#4 |
|
Algae Grower
|
so I need to turn my light down? and give it alittle more co2? I use excel
Sent from my SAMSUNG-SGH-I717 using Tapatalk |
|
|
|
|
|
#5 |
|
Planted Tank Obsessed
|
I've never had BBA personally, but most everyone seems to say that it is an algae stemming mainly from CO2 issues. Usually either two little, or the fact that it is not consistent enough.
Do you have a drop checker? Are your bubble counts consistent?
__________________
|
|
|
|
|
|
#6 |
|
Planted Tank Enthusiast
|
More Excel might cure it, of course Excel also tends to melt vals and crypts. Raising your light or decreasing the hours it is on may help. Tell us a bit more about it.
__________________
Always curious.
|
|
|
|
|
|
#7 |
|
Planted Member
|
I had that growing in a 10 gallon tank I had with two 13 watt CFLs. I switched to 10 watt CFLs and haven't seen much of it since. So, I agree with the too much light explanation.
__________________
Rena Pimp # 171 2 Rena Filstar XP3s
|
|
|
|
|
|
#8 |
|
Wannabe Guru
|
I had BBA in one of my tanks. I could never get rid of it. H202, excel, co2, never went away. Take the affected plants out and burn them. I had a rock with BBA on it, I let it dry out in the sun for a week, used a scrub brush on it, put it back into a clean tank and within a week there was BBA on the rock again.
|
|
|
|
|
|
#9 | |
|
Planted Tank Enthusiast
|
Quote:
__________________
Always curious.
|
|
|
|
|
|
|
#10 |
|
Wannabe Guru
|
|
|
|
|
|
|
#11 |
|
Algae Grower
|
that's what I might do it's only one plant with it
Sent from my SAMSUNG-SGH-I717 using Tapatalk |
|
|
|
|
|
#12 | |
|
Planted Tank Enthusiast
|
Quote:
Although I don't know where it comes from...I do know that every time my java moss tank gets too much light, that's when I get the outbursts. Luckily I have a school of SAE and they keep it at bay, but when I had a huge outbreak when my Dad decided to unplug the timer so the lights were on 24/7....the whole tank was filled with it. Only after roughly have a bottle of excel and manually picking out the large clumps did it finally go away. |
|
|
|
|
|
|
#13 |
|
Planted Tank Enthusiast
|
I'm saying that even if you did remove it from the rock completely it wouldn't matter any more than dipping it in H2O2 for a moment because the conditions will still make it come back. Things that kill it off won't keep it gone unless you fix the root issue. This applies equally to all algae, but people seem to think it applies more (or less depending on who you ask) to BBA.
__________________
Always curious.
|
|
|
|
|
|
#14 |
|
Algae Grower
|
thanks for the input I'll keep an update
|
|
|
|
|
|
#15 |
|
Planted Tank Guru
|
When are we getting a new fts john?
__________________
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|