Rickztahone's 55g and 2 x 10g projects (update 02-13-11)
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 10-12-2010, 07:24 PM   #1
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default Rickztahone's 55g and 2 x 10g projects (update 02-13-11)

well, after reading excessively and irritating quite a few people through PM i have finally made plenty of progress on starting these 3 tanks. I will be tackling all 3 at the same time which should be fun .

So first let me start with the tank and livestock i'm parting with shortly. i have been a discus keeper for quite a few years now and i am sad do see my discus go but i want to take on a new challenge. i currently have a 125g 6ft tank with 11 discus originally but now am down to 8 with 3 waiting to be picked up (deposit was left). The money i am making from the discus and tank has been going towards buying all the things i need for these 3 tanks. Since these will mainly be shrimp tanks i could not keep the discus since they have been notorious shrimp eaters. So, here are some pictures of my discus and 125 currently:


full tank shot

that is a 7" whopper right in the middle which has scratches because breeding has gotten fierce as of late in this tank. he scratched himself on the driftwood.

the tank was predominantly turqs but i had quite a mix at one point. the red melons were some of my first discus which is why i kept them. they hardly have peppering at all. those are sold and waiting to be picked up currently.

you can actually see the red melons laying on the power head here, lol.

So, with the sadness that came from selling all my discus and shortly my 125 i embark on this new challenge.

Tanks:
55g will be the community tank with co2
10g no co2, will be mainly the selective breeding tank
10g no co2, will be the culls tank
hopefully i can remove the rim from both of these with no problems

Filtration:
I currently have 2 XP3's in my 125 which have 2 Hydor 300w inlines. I will be using these on my 55 and more than likely adjust the flow so that there isn't a crazy tornado in the tank. I doubt i will need a power head.
The 10's will hopefully have 2 Eheim 2213's (i bought one so far) w/ lilly pipes.

Stocking:
All 3 tanks will have:
RCS i just acquired some great ones that are so red they look like fire reds
CRS so far i have A-S+ grade
only the 55 will get around 100 chilli's or so
Otos for 55
and possibly BNP depending if they do not eat shrimp, i still have to read up on that.

Lighting:
55g will get a 48" T5HO w/ 2 (or possibly 3) bulbs. this will be raised with fixture legs
10g's will both have a 48" T8 32w suspended over them (yet to determine the height)

CO2:
I bought a 2 stage concoa regulator off ebay and i bought the post body from Jason. It has a clippard solenoid, Fabco needle valve and i bought a JBJ BC from a fellow member. the 10# CO2 tank i also bought on ebay new and the local airgas said they will fill it for $14. My CO2 will be diffused with a rex style reactor which i am still working on.

Substrate:
55g I will be buying MTS from a fellow member and i am yet to decide what i will cap it with, i am still reading on it, i know i want to go with black for sure though.
10's I have already bought 12L of ADA Amazonia

Fertz:
55g will have full dry fertz dosing, I am still asking on another thread which i need to use considering my lighting and water parameters.
10's will not have any fertz in the water column, maybe some root tabs and such.

Stand/Canopy:
All are yet to be built but i am fairly sure i will get around to building both pretty soon, lol .
I will go with 3/4 wood and paint it black, i will not stain any of it since i hated how my 125 stand came out, it just seems i am not that handy with a paint brush. So i figured if i just painted it it might be the easiest route. the 55g Canopy will be a flip canopy.
As mentioned before the 10's will have a hanging light fixture and the stand for the 10's will hopefully match the one for the 55

Flora:
I am completely unsure, there are just too many beautiful plants out there but i think i will try to edit myself as much as possible and only get a few types as oppose to a whole bunch of plants that makes it look cluttered. i plan on keeping some of the plants i currently have, some of which i do not know the name of. I will keep my driftwood with anubias and maybe the huge ball of java moss, see pic:



i'm concerned that this piece might be too large for a 55 and might not use it. it would be a shame since it's such a nice piece, maybe in a corner somewhere?

well, that is all i can think of for now, here are all the pictures:



this is where my shrimp are currently kept in, not the prettiest but it works



the lighting was not bad at roughly 20 bucks inclucing bulbs at home depot


other 9L en route from ADA


it took me a while to piece this together (the acquiring of the parts, not the actual building, Jason assembled the whole needle valve, check valve and solenoid)

that is all for now, i will be taking pictures as i make the stands/canopies and a few other things. thanks for viewing!

Last edited by rickztahone; 02-14-2011 at 11:21 PM..
rickztahone is offline   Reply With Quote
Old 10-13-2010, 12:05 AM   #2
snausage
Wannabe Guru
 
PTrader: (29/100%)
Join Date: Mar 2010
Location: Jersey Shore
Posts: 1,167
Default

Man, that was the sweetest looking discus breeder tank I've ever seen. I don't know how you got up the nerve to take it down. The discus themselves look sweet as well. You got more pics of it??

Good luck with the CRS tanks. Aside from mosses, I think hygros are the ideal plant for a CRS tank; they don't require much care and they absorb their fair share of nitrates. I've learned the hard way that a CRS tank shouldn't be too densely planted. It makes cleaning and keeping track of them a real hassle.
snausage is offline   Reply With Quote
Old 10-13-2010, 04:08 AM   #3
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

Quote:
Originally Posted by snausage View Post
Man, that was the sweetest looking discus breeder tank I've ever seen. I don't know how you got up the nerve to take it down. The discus themselves look sweet as well. You got more pics of it??

Good luck with the CRS tanks. Aside from mosses, I think hygros are the ideal plant for a CRS tank; they don't require much care and they absorb their fair share of nitrates. I've learned the hard way that a CRS tank shouldn't be too densely planted. It makes cleaning and keeping track of them a real hassle.
i do have more pics, and trust me, it breaks my heart to do it since i've dedicated so much time to get them that big, my smallest one was 5.5" and everyone else was at least a 6 incher. here are some random pics of when i had them all:

that's when they were a tad younger. i still had my domestic brown then

full tank shot

and this was my Penang Eruption which was one of the first to sell on CL for $75! She was a beaut and had intense pattern. i can't believe i sold her so cheap, she was 6.5"
rickztahone is offline   Reply With Quote
Old 10-14-2010, 04:27 AM   #4
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

i forgot to mention my water change plumbing. I bought a temperature control valve since my discus like the warmer water. So the temp valve keeps the temp from going over 84F even when i have both valves fully open. here's a shot under the stand where the valves are for H and C.


on that same picture you can see where i made a hole for the pvc drain through my wall and out to the side of the house to the front lawn. here's where i placed the pvc end to drain the tank.


It has a cap to keep critters out.

here's a shot of how the temp valve looked at first, but i had to change it a bit due to the fact that it mixed both the H/C water through the temp valve. Now, it mixes them through the top side of the U which has both the H/C added to it and does not reduce the output pressure. It took some tweeking but i finally got it to where i liked it. Sry, i don't have any current pics of how it looks now so i had to settle for the old one.


i generally do not use the hose to fill up the 125 since the pvc leads directly to the U that hangs on the rim, but i added the hose so that i can fill up another tank if necessary. It use to take me quite a while to do a full water change, in my case from 80-100%. It takes me roughly 20 minutes to do a full WC now
rickztahone is offline   Reply With Quote
Old 10-17-2010, 12:31 AM   #5
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

after much struggling with these 10's to make them "rimless" i finally got them bad boys off, lol. there is a silicone residue that i was not able to eliminate even with a razor. i also installed the shop lights but i am not sure if it is a good distance from the tanks. also, those lights seem to be emitting some heat which kind of scares me due to the fact that i need that tank to stay in the low 70's due to CRS's. i will monitor the temp closely.

The stand was relatively easy to make. of course that is not how it is going to remain but for the time being i just built the structure and i will by all the wood to make it all nice pretty later .

i included a shot of the 5.5 at the end with a shot of the gorgeous RCS i got from Nature Aquarium locally, i swear they look like fire reds! ($3.50ea, what a bargain!)

on to the pics:








please excuse the water marks on the 10's, i had just finished cleaning them. also, the pics are super exposed, i had to shoot on auto because i'm kind of in a rush.

well, let me know if you have any feedback, good or bad .
__________________
rickztahone is offline   Reply With Quote
Old 10-17-2010, 12:34 AM   #6
DANIELSON
Planted Tank Enthusiast
 
DANIELSON's Avatar
 
PTrader: (8/100%)
Join Date: Jul 2010
Location: clovis ca
Posts: 669
Default

Those are some red cherry's nice. Is ur 55 going to have tons of shrimp too or just the 10's? A 55 shrimp tank would be sick.
__________________
USMC SGT TYPE
DANIELSON is offline   Reply With Quote
Old 10-17-2010, 12:39 AM   #7
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

Quote:
Originally Posted by DANIELSON View Post
Those are some red cherry's nice. Is ur 55 going to have tons of shrimp too or just the 10's? A 55 shrimp tank would be sick.
yeah, the 55 will be mainly a shrimp tank with the only exception being about 100 chilli's and a few oto's. i will keep one 10 for selective breeding (you know those super reds are going in that tank) of rcs and crs, and the other 10 will be for culls.
__________________
rickztahone is offline   Reply With Quote
Old 10-17-2010, 01:16 AM   #8
FSM
Wannabe Guru
 
FSM's Avatar
 
PTrader: (1/100%)
Join Date: Jan 2009
Location: Georgia
Posts: 1,189
Default

Why are you downsizing from the 125 to a 55?
__________________
FSM is offline   Reply With Quote
Old 10-17-2010, 01:36 AM   #9
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

Quote:
Originally Posted by FSM View Post
Why are you downsizing from the 125 to a 55?
Mainly because the 125 has some scratches, not huge ones but enough not to make it a show piece IMO. This 55 is also serving as a test tank to see if I can manage a fully planted tank. My ultimate goal is to buy a brand new 240 and have it fully planted with 16 discus. I need to get my feet wet first
__________________
rickztahone is offline   Reply With Quote
Old 12-25-2010, 06:26 PM   #10
Hilde
Planted Tank Guru
 
Hilde's Avatar
 
PTrader: (1/100%)
Join Date: May 2008
Location: Mableton, GA
Posts: 4,526
Default

Quote:
Originally Posted by rickztahone View Post
Mainly because the 125 has some scratches, not huge ones but enough not to make it a show piece IMO. This 55 is also serving as a test tank to see if I can manage a fully planted tank.
I am amazed that you didn't try to get rid of the scratches. So what are you going to do with the 125 G?

So you are going into breeding shrimp? I don't know why but many love the red shrimp. Should be easier to sell than the Discus since you can put them in a small tank.
Quote:
Originally Posted by rickztahone View Post
only thing i need is to sell off my fish in the 125!
I wonder if you could make more money selling the fish in Spring on AquaBid
Hilde is offline   Reply With Quote
Old 12-25-2010, 06:38 PM   #11
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

Quote:
Originally Posted by Hilde View Post
I am amazed that you didn't try to get rid of the scratches. So what are you going to do with the 125 G?

So you are going into breeding shrimp? I don't know why but many love the red shrimp. Should be easier to sell than the Discus since you can put them in a small tank.

I wonder if you could make more money selling the fish in Spring on AquaBid

i did read that thread on scratches but seeing as some of the scratches i have can be felt quite easily with my finger nail i didn't even want to bother. i will be selling the tank/stand/canopy/lights locally for real cheap.

i'm not going into breeding shrimp per-say but i am definitely setting up all shrimp tanks. I will be leaning more towards CRS's than RCS but i have some really good RCS to work with currently.

I will resort to selling them on aquabid if worse comes to worse. Hopefully someone locally can buy them. I also might have a sale pending if i would be able to ship them. we shall see.
__________________
rickztahone is offline   Reply With Quote
Old 01-02-2011, 01:10 AM   #12
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

Set up the 3 way manifold i got from Jason but am having some problems with it. See if you can help me out with it here please




__________________
rickztahone is offline   Reply With Quote
Old 10-17-2010, 10:05 PM   #13
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

i finally finished my reactor


__________________
rickztahone is offline   Reply With Quote
Old 11-08-2010, 01:02 AM   #14
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

well, i have an update finally. i have been hard-pressed for money lately so the builds are taking a little longer than i would like. I bought the slim-line backgrounds for all 3 tanks, fairly cheap too. i also finished the skeleton of the 55 stand today but i didn't bring it into the house as of yet. i still need to buy lights/substrate/fauna for the 55.

The 10's are pretty much ready to go, but since they have aquasoil they will not be cycled for a while. i was thinking of growing some HC with DSM, my question is, if i do that how long will it take to cycle the tank AFTER i finish with the DSM? i have honestly never cycled a tank, i have always taken media from another filter and started a cycle that way.

here are the pics: the 55 didn't have such great lighting seeing as it was on the floor. the last picture is the one that shows all tanks, a sight my wife is not too happy with! LOL. i'm yet to sell all my discus in order to sell my 125.










This picture shows pretty accurately the actual color of the background.





__________________
rickztahone is offline   Reply With Quote
Old 11-16-2010, 06:52 PM   #15
rickztahone
Wannabe Guru
 
rickztahone's Avatar
 
PTrader: (15/100%)
Join Date: Jul 2009
Location: Pacoima, California
Posts: 1,346
Default

so i wanted to try out the DSM. If it doesn't work oh well, if it does, great! I don't think i have enough lighting on the smaller tanks to grow HC but we shall see. Can anyone tell me if the placement is off on my planting of HC for optimum emersed growing?


__________________
rickztahone is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:20 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012