The Planted Tank Forum - View Single Post - Want to DIY a co2 reg
View Single Post
Old 02-03-2013, 12:27 AM   #40
Darkblade48
Moderator
 
Darkblade48's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2008
Location: Japan
Posts: 9,259
Default

Quote:
Originally Posted by Mathman View Post
I boxed in red what I think is the maximum working pressure for each model...Am I correct?
I do not see anything.

Quote:
Originally Posted by Mathman View Post
For example, the VTS 250D has a working pressure of 5-125psig. So, in the event that one wants to replace the LPG the best choice is to go with one with a maximum 200psi... Correct?
This is correct to some degree; you can replace the low pressure gauge with one that is lower than the maximum working pressure (see below).

Quote:
Originally Posted by Mathman View Post
I've noticed that some people use 100 psi or recommend to use this gauges...isn't that a risk? What if one accidentaly goes over the 100psi mark...the gauge will break. Right?
Yes, if you go over the 100 PSI mark accidentally, while the regulator itself will be fine (since it was designed to handle that delivery pressure), you will break the low pressure gauge.
__________________
Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline   Reply With Quote