The Planted Tank Forum - View Single Post

Mathman · 02-01-2013, 01:04 PM

Anthony,

Thanks for the clarification. Now, lets check for understanding...the PDF for the Victor VTS 250 series indicates the following:

Is the working pressure of the manifold you mentioned, the range I see in this picture? For example, the 250C has a range of 4-80psig and the 250D series has 5-125 psig.

If my understanding is correct, a lower gauge that goes up to 100psi may work for both of these series since, for our purposes, we will never go past the 100psi?

In other words, can a 100psi lower gauge be installed on a 250D series or is a 200psi a best choice?

Thanks!

~Cristian~

02-01-2013, 01:04 PM	#31
Mathman Planted Member (View User Tanks) PTrader: (0/0%) Join Date: Apr 2009 Location: Los Angeles, CA Posts: 228	Want to DIY a co2 reg Anthony, Thanks for the clarification. Now, lets check for understanding...the PDF for the Victor VTS 250 series indicates the following: Is the working pressure of the manifold you mentioned, the range I see in this picture? For example, the 250C has a range of 4-80psig and the 250D series has 5-125 psig. If my understanding is correct, a lower gauge that goes up to 100psi may work for both of these series since, for our purposes, we will never go past the 100psi? In other words, can a 100psi lower gauge be installed on a 250D series or is a 200psi a best choice? Thanks! ~Cristian~