The Planted Tank Forum - View Single Post - Glass top+raised light?
View Single Post
Old 01-30-2013, 10:35 PM   #11
mitchfish9
Planted Tank Nation
 
mitchfish9's Avatar
 
PTrader: (3/100%)
Join Date: Apr 2012
Location: Oak Park, IL
Posts: 886
Default

Thanks for the awesome responses everyone! Sorry that I couldn't respond until now
Quote:
Originally Posted by Noahma View Post
I have a suspended light and glass top. there is very little issues with condensation. Sometimes it shows up, most of the time it does not. I put a par meter under my top with and without the glass lid and had almost no change in par values either.
That is what I wanted to hear, it makes sense that the condensation shouldn't have much of an effect now that I think of it. It's just water like the rest of the tank.

Thanks, that was a good
Quote:
Originally Posted by scapegoat View Post
If i remember, the glass tops pretty much halve the PAR value by the time it gets to the substrate.
Like others have said, only if there was a lot of mineral buildup that might happen.

Quote:
Originally Posted by raulfd4 View Post
I asked this specific question on Hoppy's thread about lighting with PAR vs Watts, and he said that as long as there is no mineral buildup on the glass, there shouldn't be much of an affect on PAR because of the glass and condensation.
Great!! Hoppy knows his stuff.
Quote:
Originally Posted by PlantedTankLover View Post
No to take over, but whats the point of raising the light above the class. I just have mine sitting on it.
Since most people's algae issues are because of light, it makes sense to try to raise the fixture instead of buying a new one.

Quote:
Originally Posted by wkndracer View Post
Tanking 5dGH, 2dKH water dust on the dry side is more troublesome than anything on the tank side of the lids. Running the air conditioner 95% of the time living in Florida my tanks are almost all covered.

I raise lights to reduce the value balancing new tanks rather than changing fixtures.
Thanks for the input, it's all about balance and sometimes that requires raising the light, especially for low tech. Thanks, hopefully this thread will help some other people.
mitchfish9 is offline   Reply With Quote