The Planted Tank Forum - View Single Post - 48 x 18 x 18 High Tech Rimless Build (photo heavy)
View Single Post
Old 01-25-2013, 03:44 AM   #1
Planted Tank VIP
GDominy's Avatar
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,417
Default 48 x 18 x 18 High Tech Rimless Build (photo heavy)

The last few days have been a whirlwind of activity. Ive committed to tearing down and selling off my reef aquarium as I did not want to move it into my new apartment. Im not one to go without an aquarium for long, so I'm planning on salvaging a significant portion of my old old equipment to be re purposed for a planted tank (something I have dearly missed over the last few years).

I've started ordering my parts, including the rimless tank itself (it should be ready within a couple of weeks).

The build will be as follows:

Tank: 48"x18"x18"
Lighting: 48 x Cree XPG's, 24 x Cree XPE Royal Blues, 4 GHL Simu Spot moonlights (Reed, White and Blue LED's), Dimmable via Meanwell ELN-60-48-D's
CO2: 5lb Bottle, Aqua Medic CO2 Reactor 1000 (I used to own one and loved it), Reef Fanatic CO2 Regulator w/solenoid and bubble counter
Filtration: Undecided, will be a sizable canister filter, brand not yet determined (Maybe a Rena?)
Substrate: Not sure on this yet, open to suggestions (Eco complete or Flourite are easy to get and reasonably priced out here. Ive used both before)
Heating: Hydor ETH 300 Watt External Heater
Cooling: 1/10th HP Chiller (undersized, but most likely will never get used, was able to cool my 90 Gallon reef easily so should be fine for this tank)
Dosing: GHL 4 Pump Dosing Pump w/Bubble Magus Dosing chambers full of ferts
Automation: Profilux IIIex w/expansion box. Unit will control sunrise/Sunset, Cloud simulation, storm simulation, heating, cooling, fan speeds for the LED's, CO2 Injection (via Ph monitoring), possibly auto top off (havent decided on this yet).

I am fortunate enough that I already have most of the expensive equipment (including all of the LED's, drivers, Profilux equipment, chiller, CO2 Regulator). Leaving me with a relatively short shopping list:

Aquarium itself (ordered yesterday)
Stand (may build one, havent decided)
2 x 6"x20" Heatsinks
72 x 60 degree optics
Thermal Paste
Cannister filter
5lb CO2 Bottle (needed a short one to fit in the stand, I picked this up today)
Co2 Reactor (Aqua Medic Reactor 1000)
External Heater

The proceeds from selling off my reef equipment has offset about a third of this so far, and hopefully will cover another third before I am done.

I'm a couple of months away from seeing water in a tank as there will be some work in building the new light and obtaining the rest of my parts. I"ll probably start with stripping the old LED arrays and building the new one.

Progress to follow, its just the beginning.

Last edited by GDominy; 02-18-2013 at 06:50 AM.. Reason: Updated title
GDominy is offline   Reply With Quote