The Planted Tank Forum - View Single Post - GLA Atomic Paintball CO2 Regulator to CGA320?
View Single Post
Old 01-06-2013, 04:17 AM   #7
jester56
Planted Member
 
jester56's Avatar
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Covington, LA
Posts: 150
Default

FWIW, Guys

The most common 20 oz CO2 tank sits at room temp with 800-850 psi. Most gauges that size are too small to get any decent level. And CO2 tanks show that same psi gaugeadingull down to a couple of ounces before it starts to drop. CO2 is measured by weight.

Nitrogen, or HPA (High Pressure Air) comes in 3000 & 4500 psi steel/aluminum and carbon fiber. 3000 psi tanks are almost exclusively steel. 4500 psi tanks are carbon fiber wrapped with aluminum bladders. HPA is measured in volume. Common tank sizes are 45, 48, 68, 70, and 88 cubic inches. HPA needs a step down reg.

This info is based on paintball use.

Hard to see how that regulator would fit on a 5 lb tank. The 5 takes the same connector that the 50 lb cylinders.
__________________
Nikon Pimp #084
"The legal quarter of tight lipped men, push for order, then repeat again." KTP
jester56 is offline   Reply With Quote