The Planted Tank Forum - View Single Post - Diy 10w led - cheap! : )
View Single Post
Old 04-13-2012, 08:49 PM   #6
Adkins.its
Planted Member
 
Adkins.its's Avatar
 
PTrader: (7/100%)
Join Date: Oct 2007
Location: Fort Wayne, IN
Posts: 222
Send a message via AIM to Adkins.its
Default

Quote:
Originally Posted by prototyp3 View Post
Anything eBay and DIY scares me. But that looks great in that light housing. Temperature staying cool? What did the build total come to?
Its really pretty basic. And The driver gets warmer than the heatsink. I have never tried to measure the temp of the heatsink. It is room temperature to the touch so I don't even worry about it. I added the total cost to the OP.

Quote:
Originally Posted by dbosman@msu.edu View Post
Impressive mod.
Have you checked the temperature of the heat sink? Does it really need the fan or could a couple of vent holes in the backside of the can provide air flow?

Please let us know how it works for plants.
Yep, its room temp. It really has to have a fan or it will get hot. vent holes would not be enough.

It has already been proven by other board members.

Quote:
Originally Posted by carpalstunna View Post
seems like a wide swath, maybe it would benefit from some optics at that height. A cheap addition. Itll work for plants, 7000K.
It could definitely use a lens or reflector.

Quote:
Originally Posted by jedimasterben View Post
I can tell you right now, it may look like one hell of a deal, but going with a cheap chinese knockoff LED isn't going to be cheap in the long run.

These 10w LEDs put out what is listed as "600-700 lumens", which is most likely not true, as well as being 6500-7000k. That's 60-70 lumens per watt, which is very inefficient.

A single Bridgelux BXRA 950-B (another 10w LED, the LED series these guys are trying to copy) running at 500ma puts out over 1100 lumens MINIMUM. They are more powerful and more efficient than even the CREE XM-L.

The LED will burn out very quickly on that heatsink inside of that fixture. You will need to place it on a better heatsink out in the open and run a fan on it to cool it down. As you get into higher wattage LEDs, you need significantly more cooling than 3w LEDs. It will burn out in a month, and you'll be need to purchase another one and wait three weeks for it to arrive. That one will burn out in the same amount of time unless given proper cooling.

You can definitely go with cheaper options, but if it's going to cost you significantly more in the long run, why bother?
Please check out the OP. There is a picture of the heatsink...with a fan.
__________________
11.4g - Rimless Tree Scape
Adkins.its is offline   Reply With Quote