Ok got the stuff in....
BTW if you order a COMBO 4 pack from Aquatic-Store you need some things before you can get it running.
1) teflon tape (to seal the threads from regulator to tank)
2) 1/4 inch tubing (to allow bubbles from counter to go to reactor)
3) extra tubing that connects to the reactor from pump and then to tank...I have an XP3 but had to go to Lowes this morning to pick up some tubing. XP3 didnt have enough.
4) screws to attach the controller to the tank stand and the reactor as well...not necessarily needed but advised.
Ok here is the setup as of this AM....It is a mess but will get it cleaned up soon.
100 Gal Planted, two Filstar XP3, Milwaukee SMS 122 pH controller, Milwaukee reg/bubble, compressed CO2, reactor 1000, 7 WCMM, 12 Ottos, 14 neons, 1 SAE, 3 German blue rams, 2 Florida Flag Fish
10 Gallon...20 Endler's live bearers planted, peat/kitty litter/sand substrate
15 Gallon...Just Schultz Aquatic Plant soil