I have a asa on/off connector connected to a Swagelok B-ORM2 valve and when I connect the Asa connector to the paintball tank with the knob on the top that pushes the pin down, Co2 comes out from every hole possible is this because the valve is not right?
That particular valve can only handle 390 PSI of pressure. You are trying to subject it to 800+ PSI, which will most likely damage the valve.
You will need to have a regulator to reduce the pressure to a usable range.
|All times are GMT. The time now is 02:06 PM.|
Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.