The Planted Tank Forum

The Planted Tank Forum (http://www.plantedtank.net/forums/index.php)
-   DIY (http://www.plantedtank.net/forums/forumdisplay.php?f=20)
-   -   how to seal DIY co2 generator? (http://www.plantedtank.net/forums/showthread.php?t=197409)

jimmytruong87 11-15-2012 03:08 PM

how to seal DIY co2 generator?
 
I'm using glue gun to seal the cap of bottle, but i always get leak air gas, very tired.
i would like to know what kind of silicon you use to seal it?
thanks for your help

Merth 11-15-2012 03:15 PM

I use a piece of rigid tubing superglued on both sides of cap

DanSanDiego 11-15-2012 03:22 PM

I use aquarium safe silicone, both sides of the lid.

Evilgrin 11-15-2012 05:30 PM

+1 on the silicone

JeffyFunk 11-15-2012 05:49 PM

Insert the CO2 tubing into the cap and then put a rigid piece of tube or a hose connector nipple into the end of the CO2 tubing. Pull the CO2 tubing out of the cap so that the rigid piece of tube or hose connector wedges the CO2 tubing into place. I've never had to use silicone to seal the CO2 tubing / cap connection area using this method.


All times are GMT. The time now is 01:35 PM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.