|
||||||||||||||
|
||||||||||||||
|
|||||||
| Advertisements | |
| Get Rid of Advertisements | |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Algae Grower
|
Ians 20g long inc DIY stand
Hi all,
Ive been nosying around the forum for a while now and have recently started my planted tank. I bought a tank from ebay complete with internal Fluval filter for £16 and then set about building my stand and hood. I really enjoyed the building of it and am very happy with the way it has turned out. I was going to venear it but i quite like the chipboard actually. It cost about £30 to buy the wood and screws to build the stand and I will defo be doing it this way again next time. My current set up consists of: 20g tank Fluval internal filter 150w elite heater 2 x 36w PC on one controller dual gage pressurised jbl co2 unit 18kg Eco Complete PH Morning 7.5 Evening 7 Amonia 0 Nitrate 5 Nitrite 0 GH 200 KH 160 and rising due to eco complete !! Fertilised with Flora 24 (although I may switch to EI sooner than I think) Here are some pics |
|
|
|
|
|
#3 (permalink) |
|
Algae Grower
|
Thanks, It contains 2 x 36w t5 PC lights on a single controller. The co2 is a JBL proflora Profi 2 system which has a 500gram cylinder, dual gauges and a solenoid valve on timer. It comes on 1 hour before lights and turns off 30 mins before lights off.
The stand and hood is made from 18mm chipboard or particle board as you in the states call it i think with 3 screw in handles. I think its great...........but then im biased ;-) |
|
|
|
|
|
#5 (permalink) |
|
Algae Grower
|
Thanks fish lover0591, I can assure you the base is extremely stable, you must remember it is built out of 18mm (3/4 inch) chipboard and has ample screws holding it together. Also the back panel is situated inside the top sides and bottom panels which gives it its stability. It doesent move at all, I made sure the measurments were all exact so it fitted together perfectly.
Co2 system cost £199.99 (£265 RRP) and they threw in another 500g cylinder, which was nice !! |
|
|
|
|
|
#10 (permalink) |
|
Planted Tank Enthusiast
|
If your looking for nice C02 Cylinders I suggest you check out Kegerators, Wine Refrigerators, Water Coolers, Beer Taps, Compact Refrigerators | BeverageFactory.com.
How long do you think that 500gram cylinder is going to last?
__________________
50 Gallon - Aquasoil Amazonian, Powersand Special, 130 W 10,000k CF, ADA Fert's, Pressurized C02. |
|
|
|
|
|
#12 (permalink) |
|
Planted Member
|
KH rises from the ECO-Complete!? I have ECO-Complete in my tank too and noticed my GH/KH levels were higher than my tap water and couldn't figure it out. So what causes the levels to rise exactly?
__________________
55 Gal, Fluval 305, GE 9325K CF 55x2 (7hrs/day), Coralife T5 56 watts (used in conjunction with the GE 9325's 2hrs/day.), Eco-Complete substrate, EI Dosing, Flourish Excel, 200 watt heater, Pressurized CO2 with Rhinox 2000 diffuser, Coralife Turbo Twist 3X - 9 Watt U.V. Sterilizer on 24/7. |
|
|
|
|
|
#13 (permalink) |
|
Wannaru Gube
|
water + chipboard = disaster
That stuff will turn to mush after too much exposure to moisture. I hope you sealed it at least. That's a beautiful tank I would hate to see it fall...
__________________
Regards, Sam
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|