|04-17-2014 03:49 AM|
The macro micro kit is 1 bag with all nutrients mixed in at the ratio that the people on the website feel is a decent balance. This is not what you want. You need to be able to change the individual nutrients as needed.
You cannot buy these chemicals from most local stores unless you have a hydroponics store near you. They are cheaper and higher quality from online vendors.
|04-17-2014 03:45 AM|
|Neatfish||Where could I buy some at a local store?|
|04-17-2014 03:11 AM|
What about that macro micro kit it looks like everything you listed?
|04-17-2014 03:05 AM|
At minimum you need KNO3, KH2PO4, and CSM+B.
I highly recommend K2SO4 as well.
DTPA iron is nice to have, and so are CaCl2 and MgSO4 but the first 3 ferts mentioned above will have everything you need in them.
I usually buy from:
|04-17-2014 02:47 AM|
|Neatfish||What do I need and where do I buy it from?|
|04-16-2014 05:00 AM|
It is difficult to tell exactly what nutrient is missing at this stage. The species of plants in the tank are not extremely good indicator plants. Also, whatever the deficiency is it is very early on and not very clear yet.
I'd say it is probably nitrogen if anything since some of the bacopa and anubias leaves are deteriorating from the tips of old leaves and nitrogen is usually the most needed nutrient out of the macros/micros.
You really need to start dosing all the nutrients if you want to keep plants. You'll likely go from deficiency to deficiency if you just add one at a time. Flourish excel is not a nutrient.
You can start out by adding low amounts of each nutrient to your tank on a regular basis and go from there.
|04-16-2014 04:02 AM|
|xxUnRaTeDxxRkOxx||Are you using any other fertilizers?|
|04-15-2014 08:16 PM|
|04-15-2014 02:24 AM|
Here is what they look like.
Only been dosing excel nothing else. Lights on 8hrs been doing co2 1hr before lights and 1hr before they go out ph is around 7. I pulled that bacopa out and replanted it a few days ago and it looks way better then what it was. some dhg melted and some of it's very green don't know why.
|04-13-2014 05:11 AM|
Still need the photo before we can help you.
|04-13-2014 04:43 AM|
|Neatfish||Tank is 5.5g with a single bright led with a fluval 20g kit. substrate is floramax and I dose excel maybe every w/c.|
|04-12-2014 04:54 AM|
Please post close-up photos of the affected plants. Then we can advise you better.
Also, what fertilizers are you adding and how often?
What light (wattage/type) do you have? What size is your tank?
|04-12-2014 04:29 AM|
|xxUnRaTeDxxRkOxx||Your co2 should come on 1 hour before any lighting comes on, and your co2 should shut off 1 hour before the lights go out. But can you give us more details about your tank?!?! Like substrate, kind of lighting, etc.... And if you can give us your water parameters, this will help us to diagnose the issue more clearly.|
|04-12-2014 04:22 AM|
You should keep CO2 on for the duration your lights are on. Excel is not needed in this case.
Is only your Bacopa not doing well? What is your lighting and fertilization regimen like?
|04-12-2014 03:55 AM|
Plants not growing?
Some of the plants look like they are melting. Maybe not enough light/co2 idk. I have the light on 7hrs a day with co2 open for a few hours and dose excel twice a week. I replanted the bacopa in different spots today they had long roots so I'm not sure why the leafs are melting.