|05-18-2014 06:17 AM|
|Algae.||so i think i fixed it, got another refill after just 1 month of use, but this time i lubed the o rings and also added teflon tape|
|05-04-2014 02:10 AM|
|Algae.||hey guys, i have the aquatek mini for 1 month now at 1 bps, filled it up a month ago at 750 psi but now its at 300-400 psi already, i did the soapy water leak test and looks like i have a micro leak, at the tiny hole on the bottom of the regulator.... i have a new o ring on it whats going on? do i need to lube the o ring? should i use teflon tape?|
|04-15-2014 09:53 AM|
|ahoysteven||yup, took my co2 tank to get it refilled and the guy notified me that my o-ring was missing. he gave me a new one and everythings been going swimmingly ever since|
|04-07-2014 04:04 AM|
|04-07-2014 03:59 AM|
|Shremph||Replace the O-ring on the Co2 tank. I can't say for certain that this is the problem, but I had a deformed O-ring on a tank that leaked. Replacing the o-ring solved the issue for me.|
|04-07-2014 03:38 AM|
Aquatek Mini Regulator leaks nearly all CO2 after 3 weeks consistently.
So I recently picked up this regulator with an Empire 20oz tank. I've been having an issue where after about 3 weeks of running the tank suddenly starts losing pressure. I refilled it, tightened everything and everything seemed fine. 3 weeks or so later, the same thing happened. I tried spreading soapy water over everything but I don't see any bubbling.
Anyone know what causes this? It's only 3 months old...