|Topic Review (Newest First)|
|12-15-2013 07:11 AM|
|Ultimbow||what size aquarium you have for that setup of led??? Really like it and i am looking to do something really close to it.|
|11-22-2013 02:21 PM|
|dustbust_1||Thanks Skanderson, never thought of that. Makes sense.|
|11-22-2013 05:01 AM|
|skanderson||one problem now. dont run the power to the meanwells off of one wire from the power supply. that wire will get really hot unless it is very large. just do 3 home runs to and from each of the meanwells to the power supply.|
|11-21-2013 11:29 PM|
|Legot||That looks much better. There was no way that the original power supply was going to drive that much power without overheating FAST.|
|11-21-2013 09:13 PM|
K, here is the updated version.
Still using Steves LEDs
2 x http://www.ledgroupbuy.com/meanwell-...0h-led-driver/
1 x http://www.ledgroupbuy.com/meanwell-...0h-led-driver/
|11-21-2013 08:13 PM|
|dustbust_1||Plan of attack number 2 in the works. Thanks for the input guys.|
|11-21-2013 04:40 PM|
|skanderson||make sure you are always going from the positive on the ldd to the positive of the first led then out the neg to the next positive and so on through each string. also make sure your greens and reds can take 1000 mamps. mine are 700 m amp max. so you may want to change to a 700 max mamp ldd for that string. other than that and the dimming issue above it looks like a promising light set up. i would be very interested int he par numbers and how you like the color of the light.|
|11-21-2013 02:48 PM|
here are the LEDs
I should mention this is my second LED setup and im a novice on the subject.
|11-20-2013 10:05 PM|
Something doesn't seem to add up at all. (The PWM issue above does need to be fixed as well)
Can you link to the exact LEDs you're using?
|11-20-2013 07:08 PM|
|O2surplus||That's not gonna work. The Meanwell LDD-H requires a 5V PWM signal for dimming, not potentiometers. You'll need to remove the pots and connect an Arduino, Typhon, StormX, or some other controller that provides a 5V PWM signal.|
|11-20-2013 05:24 PM|
can someone check my LED wiring?
I think I have it nailed but if any pros could way in that would be great!
I will be using Steves LEds (luxeons)
drivers will be
power supply will be