|Topic Review (Newest First)|
|04-20-2015 11:02 PM|
Before a trim:
|04-20-2015 06:22 AM|
|jmsaltfish797||Just set this up a few days ago. Home to three rcs at the moment. Stock light and filter, 25 watt heater, pressurized co2.|
|11-16-2014 10:05 PM|
Originally Posted by Guck View Post
|11-16-2014 03:57 PM|
Originally Posted by MABJ View Post
|11-16-2014 05:13 AM|
Just finished setting up my little Spec 2 gallon.
|08-26-2014 02:33 PM|
|08-01-2014 03:11 AM|
Finally rescaped my tank
Don't mind the bamboo regulator I was trying to get the co2 line down near the intake of the pump and use that to diffuse the co2 but couldn't get it to work properly.
|07-27-2014 05:03 AM|
Originally Posted by Jack Gilvey View Post
|07-26-2014 04:02 PM|
|Jack Gilvey||Thanks Mark - done! I'd add that you could also re-use the Fluval pump and tubing as well, that'd be cool.|
|07-26-2014 02:34 PM|
|MABJ||Nice work. I'd love for you to put that in the Fluval spec mods thread. A nice copy paste would do fine.|
|07-26-2014 01:05 PM|
I've had a couple Specs and love the look and form-factor but have always found myself wanting to tweak/mod the filtration. So, I finally decided to ditch the whole filter and go with a mattenfilter since I've been so happy with one (and Poret foam filters in general) in my main tank. The stock filter was very easy to remove - just silicone which cleaned up nicely with a razor blade. I used 1" 30ppi Poret and a small Jetlifter from swisstropicals.com, and I cut off the very bottom of the stock filter to use as a "gravel-guard" at the base of the foam. I have the front edge of the foam lined up with the frosted glass edge, and a Hydor Theo fits nicely as does the stock top. The foam is cut just slightly wider than the tank and stays in place by itself. 1" Poret works ok in this tank as it's only 7" wide or so, but in a larger tank the 2" foam is much more stable.
Not sure what I'll use it for, yet!
|07-25-2014 07:32 PM|
Originally Posted by dru View Post
Filtration is only live rock and and the mechanical sponge/carbon that came with the tank. I use media bags and buy my own carbon only run it when I need to. It has some bacteria media to but I would just use that for some GFO or something if phosphates get out of control.
Did swap out the stock pump with a minijet 606. Light is a coral compulsion PAR 30 18k bulb with 90 degree optics.
|07-25-2014 07:24 PM|
I just added a Finnex FugeRay 10" light to my Spec III. Fits perfectly and at least doubled if not tripled the light in my tank compared to the stock one. I was worried the 7000k lights would be too blue (I prefer a warm-looking planted tank), but they actually look great. I leave the moonlights off because they add too much blue (and the moon's light isn't blue anyway!).
I also got a new inhabitant, a slime mold! Apparently it's harmless. I can actually watch it moving through the day. It started on the ground this morning and is now arching its way across the glass. Those two pictures are about 1.5 hours apart. It's pretty fast.
I'll have to watch how the plants do with this light, and how the algae growth does.
|07-25-2014 01:32 PM|
Originally Posted by gibs View Post
I have been wanting to buy a white SpecV for a reef setup. Did you keep the stock pump? What kind of filter media are you running?
|07-24-2014 09:42 PM|
Update on Spec III
Plants are doing well. Bought a Halfmoon betta. In the top right is my temporary fix for an overly-powerful filter pump. I've ordered a 10" Finnex Fugeray for the top, Amazon reviews said it fits perfectly. I wanted the Planted+ light, but they don't make it in 10" (except a clip-on that looked impossible to mount to a Spec). The betta is doing fantastic, making a bubble nest his first full day in the tank and happily swimming around and eating all day while I'm at work.
|This thread has more than 15 replies. Click here to review the whole thread.|