|08-14-2013 11:47 PM|
Playing around with the panoramic mode on my camera.
I just bumped up my lighting, but I didn't notice my C02 tank was empty - I think that's' why my bubble counter was bone dry one day a week or two ago, and I didn't notice it. Woops.
|08-01-2013 06:56 PM|
|majorwoo||I think I will try some whites, sounds good.|
|08-01-2013 06:15 PM|
Here is my homemade white moonlights, they are just 2 LED nightlights - a little brighter would be better but it was the best I had access too
Pic: (long 10 second exposure, not this bright in person)
my amateur build, would love to redo someday:
|08-01-2013 06:07 PM|
|08-01-2013 01:10 PM|
|majorwoo||I've just replaced all my 13=60 watt CFL bulbs with 23=100 watt CFL's. I felt like i wasn't getting the light I needed for my pressurized CO2 setup so I've decided to up it and see.|
|06-22-2013 12:24 AM|
Now I am in trouble Someone went and sold me a regulator for a good price and a few days later...
Milwaukee 957 + DIY Rex Reactor plumbed into my XP4
|05-24-2013 07:02 PM|
|EngineChauffer||That driftwood is insane! Very nice piece! Great job on the reinforcing of the floor and building the hood also. Coming along nicely man, lookin good! I actually like the glow from the moonlight, never thought about rope lighting in a full hood...very ingenious. I am sure you could find an in-line dimmer and set it where you prefer if you would want...just a matter of finding or modifying something to work. In fact, you could prob buy a cool white ropelight to add to it and have a dimmer on that also and mix the blue/white to where you want it. Thats basically what I have done with my moonlights.|
|05-24-2013 06:18 PM|
Got my driftwood in, tied some java moss to it. Really happy with it right now.
|05-24-2013 05:54 PM|
3 clown loaches
3 yoyo loaches
1 loach that was supposed to be a yoyo, but might be a kubotai
2 rainbow shark
5 unknown tetras
6 neon tetra
10 adult mollies and maybe 7 fairly neon sized ones that have grown up
Mainly a community tank. I like the loaches, and my girls like watching the molly babies.
I might pick up a few more of the loaches once I get through the Ich I'm fighting right now. I would of preferred a pair of angels, but they would probably snack on the neon's and the baby mollies so they are a no go.
|05-24-2013 04:22 PM|
I have two canisters on my 6' tank too. I think the flow is a good idea plus it simplifies things when one canister gets cleaned (just rinse under a faucet) or is not working . I spray one across the top and angle the other towards the center of the substrate.
Have you told us what you plan on keeping in there?
|05-24-2013 01:08 PM|
I would suggest http://www.dynamat.com/products_arch...l_dynapad.html in the bottom cabinet if this is staill an issue
|05-24-2013 02:53 AM|
Picked up a piece of Mopani wood. If it works the way I want, it will stand in the back of the tank nearly 22" tall. I'm really excited. Soaking it in the tub with some dechlorinator.
|05-20-2013 01:18 AM|
Today's project - moonlighting. Just a 16' rope LED mounted to a piece of scrap wood. I may change it out, as I wanted a bit more of the streaking look as opposed to the blue glow I have now.
|05-13-2013 01:10 AM|
Yeah, the lighting is DIY. Specifically, I used 5.5" clamp on's from Home Depot.
And I use the 6500k CFL's from Lowes (home depot doesn't carry them here)
If you wanted to go with the 100 watt CFL's (http://www.lowes.com/pd_302257-3-269...cfl&facetInfo=) you may want to get the larger light housing (http://www.homedepot.com/p/Bayco-150...1#.UZA62bV-p8E) as the 100 watt's wont fit in the 5.5's. If I was buying it myself I would do that this time around, but I don't know if I'll need the 100 watt CFL's (they are slightly larger).
The bulbs themselves work great, I used them on my other tank:
when I actually converted the T8 hood to be a 4x CFL, but since I had to build my own canopy this time I decided I would just use the hoods as a vertical mounted CFL gives a lot more light then a horizontally mounted one according to some research by the guys here (http://www.plantedtank.net/forums/sh...t=85667&page=2 check out post #21 by i4x4nMore and some more work by Hoppy here http://www.plantedtank.net/forums/sh...d.php?t=184368)
I spent some time on my canopy this morning while the girls slept in, and I've got it to a pretty decent state. The original lights on top of the tank:
So I built a frame out of 1"x2" pine to keep it light.
I then boxed in the frame with 5mil plywood project panels from Lowes. I painted the outside black to match the stand:
And the inside I painted white with Killz for a little reflective properties, and to help with mold/mildew as I've read it's decent at that. I built the front panel on a hinge to give me easy access. I did make a mistake on the hinge placement, so that the panel won't lay flat on top of the tank when opened completely - I will have to score off a sliver along the top edge as the front panel when it folds up will hit the top panel - once I score that off it should allow it to swing all the way to rest on the top.
I still need to consider if I'll add any trim around the edges (corner molding perhaps) - and I want to add some magnetic cabinet hardware to keep the panel tucked in tight when it's closed.
As the original stand was just a 2x4 skeleton, I took a piece of the plywood and made a panel for the bottom as well.
The knobs unscrew to allow the entire panel to be removed to access filters and storage.
|05-12-2013 08:01 PM|
|bjmycroft||Hi there - whats the lighting you have on the tank? Im in the process of tearing down my reef tank and going planted and its a similar size to your tank (30" front to back, 28" water depth, 7 foot long) so im following your thread with a lot of interest! In the photo it looks like DIY lighting? Are they MH or some kind?|
|This thread has more than 15 replies. Click here to review the whole thread.|