|05-06-2013 06:18 PM|
Thanks. I definitely heavily employ sandwiched construction techniques in my build.
It seems relevant so thought I'd post a link to my build journal for my new knock-down stand which I'm also building using entirely hand tools:
|04-30-2013 08:42 PM|
Your fit and finish is very good considering your limitations the_deeb. Although you are only using smaller dimensional lumber it is easy to create thicker supports using sandwiched construction techniques.
I also give you some credit for keeping the grain situated. That alone makes it look more professional overall.
|04-30-2013 08:34 PM|
I've always lived in relatively small apartments and haven't had room for power tools and I've built 3 or 4 stands with just hand tools (with the exception of an electric drill). It takes patience and a little more effort and time but it's certainly possible to get nice results.
When I'm planning out the stand design I just try to account for the limitations of of my tools and resources and get HD/Lowes to make long cuts on plywood panels that I wouldn't be able to do myself. I use a lot of 1X4s and 1X3s in my construction because their a little easier to manage and cut by hand.
This stand was for a custom 90g wide and I built it primarily out of pine 1X4s. I made all the cuts myself with a cheap tenon saw and finished with a sanding block.
This one was for a 65g. I had Home Depot cut the birch plywood panels and cut and assembled the 1X4 supports myself:
This one was for my 300g paludarium and was built in a similar way
I'll be posting a build journal soon for my current ongoing project which is a disassembleable stand for my new 150g riparium, also built entirely with hand tools.
|04-30-2013 03:07 PM|
|Soothing Shrimp||+1 Did that many'a'times in my younger days. Now that my youngest kids are 4 though, I have to wait a little while until that climbing everything phase is over with. LOL|
|04-30-2013 01:34 PM|
From my youth "hippie stand" ~ A standard concrete block is 16x8x8. Stacked 4 high your at 32" which is ave. stand height. HomeDepot sells Plywood in a 'Hobby Pannel size 2'x4' and 1/2 sheets of Plywood that are 4'x4' Home depot does 1 or 2 cuts free. Cut the plywood so you have a base & top. Set the base on the floor, stack your blocks add your top.....Done! No tools, power or hand needed.
Options - You can use additional plywood as shelves by laying them between the blocks. You can use a yoga mat as a gasket between the blocks. You can seal the plywood with, "Howard's Feed-n-Wax" from HomeDepot. I use it to refinish my gun stocks & grips. It's just Bee's was & Orange oil. You simple rub it on the wood with a rag. Again, NO tools needed.
Google image search "concrete block shelf" for further ideas.
|04-30-2013 03:48 AM|
If you get the corded HF stuff it actually does last a while. I still have my 4.5" angle grinder from over 6 years ago, and I seriously abuse the snot out of it. I have yet to change the brushes (and you always get a spare set) probably due to losing them.
The battery powered stuff is where it gets hit and miss. Chargers fail often, and battery packs tend to lose capacity even when properly maintained in accordance with known practices (NiCd, Li-ion respectively).
|04-30-2013 02:56 AM|
|mcclure91||if you want to make life easier and arent gonna be using power tools a ton check out harbor freight tools there cheap and get the job done not gonna last you forever but there are dirt cheap and work pretty dang good|
|04-29-2013 08:20 PM|
|04-29-2013 07:39 PM|
You really need one of these though: ( I love mine)
|04-28-2013 02:10 AM|
When power is not the answer, go Amish. It is plenty strong to use a peg joint, as a barn holds a fair bit of weight. With modern wood glues and a properly chosen peg joint, you will not have any failure issues to speak of.
You can find these dirt cheap as flea markets too. Most people don't even know what they are.
|04-26-2013 09:08 PM|
Back when I was in college, I built a couple stands with just hand tools. got some 2x4's from the local lumber yard, walked them back to my dorm, cut them with a cheap miter like Kado posted (except lower quality), and screwed them together using a leatherman (that was the worst part).
If you build the stand properly, the screws shouldn't really be structural- they mostly just keep things aligned, and clamp it together while the glue sets.
Most of your big-box stores will cut wood, some have a certain cuts/piece limitation, others charge a certain amount per cut, it really varies. I don't think I've ever gotten a really accurate cut, I usually just get bigger pieces chopped down so they are easier to carry.
I think doing without a drill might be the hardest part, but that's still doable. And drills are fairly common, so maybe you can see about borrowing one from a friend or something. It might also be worth checking out some flea markets and such, sometimes you can find some old beatup hand tools pretty cheap, and a hand drill would be a major help.
|04-26-2013 08:59 PM|
Why don't they sell 14' lumber anymore? Heck I looked at Lowes 14' and they were more than the 16s.
|04-26-2013 07:38 PM|
|scapegoat||or do what i do... use it as an excuse to buy new/more tools|
|04-26-2013 07:26 PM|
I work at homedepot.. cuts are not always free.. depends on store policy, how good a mood the cutter is and if it requires lots of cuts of different sizes..
But it always is good to ask..
Ps.. u can also rent the power tools from hd.. 4 hr or 24 hr.. 4hr fee us pretty cheap compared to buying
|04-26-2013 07:14 PM|
Have Chuck Norris tell your pile of wood to build itself into a stand.
a good handsaw can do some damage with good technique and some wd-40. Clamp a straight edge for straight cuts. You can usually find a uber cheap "tool shop" drill at menards. Prob cost ya $20.00.
|This thread has more than 15 replies. Click here to review the whole thread.|