|Topic Review (Newest First)|
|07-12-2011 11:43 PM|
Wasserpest, check this link out.. I have one of their internal filters I have been using for months now and am quite happy with it. Also I am using one of their heaters.. not horribly expensive and I cannot complain.
I was thinking about one of their powerheads for the 20 and 55. For the 55 I can run dual pumps, one with the add-on UV attachment and rig a sponge filter to that as well. Thoughts?
|07-12-2011 06:36 PM|
Originally Posted by demonr6 View Post
Originally Posted by captmicha View Post
If you inject CO2 this way, inverting the pump also reduces the chance of an airlock in case the power goes out.
|07-12-2011 02:28 AM|
Originally Posted by sevenyearnight View Post
|07-10-2011 07:14 AM|
Why operate the water pump upside down?? Why does the sponge need to be on the top?
I apologize if this has already been discussed.
|07-08-2011 05:22 PM|
|demonr6||Quick question.. I was looking into this for a 20 gal and 55 gal tank, how many gph respectively would you recommend for each pump? For the 55 gal would I be better off with two pump setups, one on each end maybe? Thanks!|
|07-07-2011 09:01 AM|
I made a ghetto spray bat to divert the strong single current, works well so far.
Got a black plastic water pipe, some small spout like things, a plug. Drilled holes, inserted spout things. No more monsoon.
|07-07-2011 08:47 AM|
I used a rubberband to hold the sponge on. I found the suctions to hold the powerhead to the wall.
The flow is still fast. I pointed it up towards the surface which helps. But it still makes the fry have to swim as fast as they can. They sometimes get tossed and trashed in the current. If it was on all day they would have to be sprinting all day instead of eating.
So twice a day I chase them away from the front of it and turn it on for a few minutes. The whole tank moves so they can only find spots that have a little less strong current.
I hope they can take the current once they are bigger.
I should maybe find someone that wants to trade for the AC 20.
|07-07-2011 03:26 AM|
Originally Posted by shiloh View Post
|07-06-2011 09:58 PM|
It's in Dutch but the pictures are clear enough.
|07-06-2011 07:48 PM|
|caronsd||Bump for this topic, same type I use, cost me $30 total for extra sponges and everything. Works great. I came across the idea of using this when I went over to Ken's house from Ken's fish. Works like a charm right now, I even have a pipe coming off the powerhead which disperses the water into a nice even flow across one wall of my corner tank right over to the other. I've always used sponge filters in my tanks, quiet and cheap to run but this is the first I combined with a powerhead. Usually i used air pumps and varied flow for suction power.|
|07-02-2011 03:44 AM|
I've used a similar setup for over a decade for my 55 gal community tank. It works great. I didn't want to see any equipment in my main tank, so I have the Hydro-Sponge and a submersible pump in my sump tank, and then a small vertical return line (spray bar) in one corner which is easily hidden by plants. I can clean the entire thing without ever touching the lights or glass top.
The other thing I really like about a setup like this is that when baby shrimp or fish get sucked up by the siphon tube, they can just live in the sump tank until they are big enough to catch. The sponge filter makes a perfect feeding ground for shrimplets. I've rescued a few baby tetras over the years (never saw the spawn), and recently over a dozen little ghost shrimp.
I'm planning on setting up a small shrimp tank soon, and am going to use something similar to this on that as well. Right now I'm planning on building a rock waterfall in the corner which will hide the sponge and small pump.
|06-29-2011 09:53 PM|
No prob, it's pretty overwhelming...
You are right, some of the beneficial bacteria will be flushed out along with fish poop and other stuff when cleaning the sponge.
If you squeeze the sponge in a bucket of tank water, there will still be plenty of bacteria left, eager to repopulate the thing. Don't use chlorinated water to clean the sponge if bio filtration is the main purpose.
Most planted tanks have a great capacity to remove ammonia and nitrites (plants like them), so unless the tank is overstocked it shouldn't be an issue for most of us.
|06-29-2011 08:50 PM|
forgive me if this was mentioned, i didn't feel like reading the whole thread.
I would be a bit concerned about the bacterial colony. Doesn't wringing the sponge out to remove the detritus also take some of the beneficial bacteria with it?
|06-16-2011 05:08 PM|
|kamikazi||Thanks, sounds like if I go this route I will have to do a bit of rescaping but I think it will be worth it.|
|06-16-2011 04:47 PM|
The sponges I have cut in quarters are called "Oxygen Plus", sometimes sold under the Azoo brand. This one is #10, and it is 7 1/4" in diameter, and 4" high (never mind the sizes given on the website).
There is also a #4 sponge from the same series which is not as wide and could be used in its entirety. Don't see it for sale right now at the Drs.
|This thread has more than 15 replies. Click here to review the whole thread.|