|12-01-2003 01:33 PM|
Scorp...it is already
E. Simpson...thats what I am hopeing
Nordic...hahaha its actualy my mom that runs the show (dad is retired)...and no she is not looking for adoptions :lol:
|12-01-2003 01:28 PM|
|11-27-2003 07:48 PM|
|Nordic||Your dad isn't maybe looking into adoption is he?|
|11-27-2003 06:52 PM|
|E. Simpson||I think that parker valve is a metering valve.If it's the one I think it's 100 times better than that clippard valve.You should be able to really fine tune your bubble count with that one.|
|11-27-2003 05:19 AM|
|Scorpion||Maybe you can have a tank in the shop and write the expenses as business related!|
|11-27-2003 02:52 AM|
Parker valves are good 'ens. Assuming they are one of the fine control ones as noted in my web site. If so, you won't want the Clippard.
Looks like you are set to go. Have fun.
|11-27-2003 12:36 AM|
|Rex Grigg||You can but I prefer to use non-hardening pipe dope.|
|11-26-2003 01:51 PM|
Yeah even tho I get it for free im trying to keep the initial cost down. So with the all in one unit that would have been 100 the bottle would be 40 and then the reactor is 60 and that would be at the 200 mark. I had already got the lights from AHS the filstar xp1 and other random things I needed so I went this rout. Thanks to gulfcoastaquarian for helping me out with my countless questions.
SO when I thread this all together...can I use teflon tape to help seal everything except for where the regulator hooks to the co2 bottle??
|11-26-2003 01:40 PM|
|GulfCoastAquarian||And the all-in-one units still need a bottle. But you can't beat the price of free, no matter what! It's good to be the owner's son, hehe.|
|11-26-2003 01:34 PM|
|11-26-2003 01:31 PM|
Also on the adapters and stuff to get this all to fit...the guys here told me they can get whatever I need to make it work.
Ohh and if yall are wondering I work at an oil field suppy shop
|11-26-2003 01:29 PM|
Ok yall it is a needle valve made by [EDIT]Parker[EDIT]...it is supposed be able to adjust for what I need...its supposed to be a real nice one for use on oil rigs and such. But if not I also already have the clippard valve that I ordered for 9.90. I just have this one because we had it laying around the shop...it runs about 60-70 bucks our cost...but since im the owners son its free If it doesn't work I will just hook up the clippard one. As for cost so far the bottle was free (got it through the shop) but it would have been 40 filled. The regulator was like 35 and I splurged on the reactor and bubble counter since I have not spent to much so far and got the AM1000 and the AM bubble counter. The reactor was 60 and the counter was like 15 or so.
So the total is around 160 if you use the price of the clippard valve...but out of my pocket has been just about 0 so far...since the tank is at work...its now a work expense :lol:
|11-25-2003 11:19 PM|
If your needle valve doesn't provide enough adjustment, you might try to find a Clippard MNV4k2. If there is a local distributor you can get it for about $11. By mail order from fish stores, about $18. It isn't wonderful but a lot of people including me use it successfully. Also with the right adapters you can connect it directly to your regulator (after you remove the huge needle that is on there now).
For more info on all kinds of available needle and metering valves, take a look at my web site:
|11-25-2003 09:54 PM|
That's what I was thinking. It's too bad people just don't buy the all-in-one units for under $100 and be done with piecing things together, trying to find fittings, checking for leaks and such.
NOLACLS, how much will you have spent by the time you get the regulator and bubble counter. And do you have a needle valve yet?
|11-25-2003 09:51 PM|
Are you sure thats a needle valve? Looks like a gate valve to me.
|This thread has more than 15 replies. Click here to review the whole thread.|