|Topic Review (Newest First)|
|02-18-2013 03:14 PM|
Originally Posted by lochaber View Post
|02-18-2013 02:42 AM|
|FishyFishy89||I have left over silicone from resealing my 75 gallon. That's the only reason why I was thinking about sealing the holes. But oh well, I'll probably just go get me a bubble wand. Thanks tho!|
|02-17-2013 10:23 PM|
Once in a while DIY isn't a better choice. This may be one of those times.
Looking at the pictures, your holes are definitely too big. I don't really have any tips on how to put smaller holes in the stretchy hose aside from heating a pin but I can suggest that the more holes you have the better and you want them to be as small as possible (air is smaller than you can see, and so can the holes be). the elastic nature of the hose is probably stronger than an aquarium pump so simply pushing a cold pin through will probably never work, while melting a tiny hole likely will. Tiny!
|02-14-2013 01:01 AM|
|02-13-2013 10:07 PM|
|FishyFishy89||I wonder if it would be possible to silicone these holes and poke new holes?|
|02-13-2013 10:06 PM|
I just used a sewing needle.
When bubbles weren't coming out, I moved to a screw in an attempt to make it a bit larger. Screw didn't work, so I took a bit larger screw. Still didn't work. So I started using the scissors.
|02-13-2013 08:18 PM|
What did you use to create the holes? (both the current larger ones, and the initial smaller ones that didn't work)
If you just used a needle or something to create the smaller holes, I imagine the tube self-sealed, so you might need to find a way to create small holes by actually removing material. maybe a tiny drill bit if you have one, or maybe by heating a needle/pin and melting a hole?
you may be able to wedge something (toothpick pieces, etc.) in the large holes to get the same effect, but it would look pretty ugly.
|02-13-2013 04:01 PM|
|Darkblade48||As already mentioned, the biggest issue at getting it to work more efficiently, the way you want it to, is to have smaller (pin sized) holes instead.|
|02-13-2013 03:33 PM|
Thanks, I do have a flow valve. The pump I have is rated for a 90 gallon tank and it is running in a 75 gallon.
I think it works better when the holes are pointed downward. I need to get some more suction cups, I'm using most of them right now for plants.
|02-13-2013 02:15 AM|
Tank depth (water pressure) also affects this, so a larger pump should help also.
Don't forget to add a one way flow valve! Otherwise a power outage could drain tank back into pump
|02-12-2013 03:47 AM|
|02-12-2013 03:42 AM|
|FishyFishy89||The bubbles werent coming out in the smaller holes...|
|02-12-2013 03:12 AM|
|GeToChKn||Holes are way too big. If you look at the "bubble wall" tubing the holes are a bit bigger than pin size.|
|02-12-2013 02:51 AM|
DIY flexable bubble wall *troubleshooting*
I have a bit of extra tubing, so I decided to save me a few bucks and make my own bubble wall. Well.....air only comes out of the 1st hole :/ But if I angel the tubing upward, the air will flow up the tube and through the holes.....