|02-11-2013 12:46 PM|
|Django||Anybody have a system for raising one spiral 10W CFL in a big dome reflector??|
|02-08-2013 02:46 PM|
|Aquaticus||Well, I picked up some #2 pine boards last night from Menards (local home center). Going to put something together tonight with some pocket screws. Dug out some old Icecap 440s from the attic. I hope they still work.|
|02-07-2013 04:03 PM|
|Aquaticus||I seriously considered making a housing out of gutter, but with an 18" wide tank, I was concerned about light spread. I'll definitely consider it for a 12" wide tank! I've got a 30 and a 38 waiting in the wings to setup.|
|02-07-2013 03:36 PM|
Here is a DIY thread for a compact fluorescent 'gutter light' I built with an AH Supply kit which included a MIRO 4 highly polished reflector.
AH Supply compact fluorescent kit mounting in vinyl gutter
My next project will be to put together the same system with the new AH Supply LED Lamp arrays. Here is the DIY thread showing the LED Lamp array retrofitted into an old All-Glass strip light housing.
AH Supply LED Lamp array mounted in old All-Glass fixture housing
|02-07-2013 03:02 PM|
|02-07-2013 02:38 PM|
|discgo||I have been eyeballing this stuff at Menards. Form-a-Drain I think it would make a good project box for a light fixture. It is sold locally in 12' sections for $13|
|02-06-2013 07:43 PM|
Plywood from Home Depot spraypainted black. 2ft light from Home Depot as well.
Buuuuut, I just realized you're not looking to go the hood route? Mine is relatively heavy.
|02-06-2013 03:03 PM|
Pics of DIY light fixtures/housings
I've got a ballast, bulbs, reflectors, end caps, everything. Now I just need to build the fixture. I do not want to go the hood route, but I need a housing for the bulbs (2). I could make it out of:
Please post pics of your DIY fixture or housing. Thanks!