|Topic Review (Newest First)|
|01-30-2013 12:31 AM|
|AJ12||The tank is being revamped from an old layout that i inherited. The old setup had two 6' VHO's on it and is built into the wall.|
|01-29-2013 08:21 PM|
Originally Posted by AJ12 View Post
You do understand when you couple very high CRI with Kelvin temperature in this range 0f 5500-5900K as you can with this diy approach you can achieve a virtually white light.
|01-29-2013 05:06 PM|
What are you using now? Do you have lights now you're trying to replace or other tanks that will be near this one?
5700k looks blue to some, yellow to others. 6700 looks white-bluish to all, unless you keep salt water.
If you keep the ratio at 50/50, you'll be around 6200K average, more blues and you'll be more blue. It's a preference.
I've had 5700Ks and thought they were blue, then swapped to 6700K and thought they were blue. Then added some 7800Ks and they were really blue (too much). Settled for a 50/50 mix of the 5500/5700K and 6700/6800K compact floros when I had a 4x55W AH Supply setup.
|01-29-2013 04:11 PM|
|AJ12||Ive seen that thread, and it answered alot of my questions. However they say nothing of the tint of the lighting as well as i was hoping a few people would chime in on the quality.|
|01-29-2013 03:24 PM|
This thread will likely address your concerns.
|01-28-2013 11:57 PM|
LED help for a 150g
Im aware there are a few threads out there that may be similar. Im trying to figure out the best LED units to put on my tank. A friend of mine suggested to go to buildmyleds.com. I like the idea of choosing the spectrum, but i could use some advice. I based my choices off of the websites plant LED, but with a few changes. I added two cyan and bumped up most of the 5700k to 6500k, keeping only two 5700k. My fear is that the lights will look very yellow on the tank (which is why i changed many of the 5700ks). Can anyone way in on this? I'm open to suggestions. This would be for a 150 gallon tank (72"x18"x28") and im planning on putting four 36" units. Nothing has been ordered yet, and if any one can chime in on the quality of this companies lighting im also very interested in hearing about that too. Thanks in advance, Alex