|Topic Review (Newest First)|
|01-28-2013 09:14 PM|
|HD Blazingwolf||either way, those barbs cement nicely i guess is hould have made that more clear. i've cemented them into pvc, and abs bulkheads to pvc just fine|
|01-28-2013 08:50 PM|
|VA2GXB||No Ace in Quebec, mind|
|01-28-2013 08:48 PM|
Ace by me has a nice selection of PVC bits and pieces that Lowes and Home Depot don't carry. They also carry reinforced tubing... I had issues with the plain tubing from lowes collapsing on itself, so got the threaded tubing from Ace.
Anyway... uh, yeah, Ace has some nice threaded pvc parts.
|01-28-2013 07:58 PM|
|VA2GXB||As does Rona, our version in Quebec...I must actually go to home depot! I have some ABS pipe left from a radio project...perhaps best to keep the whole thing ABS. Perhaps I'll have better luck finding threaded caps in ANS than PVC, and use the appropriate weld.|
|01-28-2013 07:50 PM|
i believe they are abs plastic. ace hardware sells the barb fittings that screw in. so does lowes or home depot
slip barbs are a little harder to find, at least in my area
either way. pvc cement should work if u want to try it
|01-28-2013 06:57 PM|
Grey barbs, reducers etc...pvc?
So I'm angling to make an inline reactor for my planted setup (currently less than 10ppm co2!), I was wondering precisely what those grey fittings are made of. We do not have nice threaded end caps for schedule 40...so what to glue them in with. If they are pvc, then the cement will do