|01-22-2013 11:21 PM|
35psi co2 trapped.
power on the solenoid or turn the regulator handle clockwise to release the co2.
|01-22-2013 10:21 PM|
|TwoTacoCombo||What is the range of this gauge? Is it pegged at 35, or is this somewhere within the working range of the reg?|
|01-22-2013 10:14 PM|
It is possible to encounter this situation if you have a dual stage regulator, and have trapped the gas in the second stage regulation (i.e. between the first stage regulation and whatever is downstream of the regulator, such as a solenoid).
However, this is probably not the case and as exv152 mentioned, your regulator (gauge) may be damaged.
|01-22-2013 09:22 PM|
|01-22-2013 09:09 PM|
Second gauge on regulator does not reset when not connected.
The second gauge on my regulator does not reset to 0 (it stays at 35psi) after I disconnected the unit from the CO2 tank. Is this normal?