|01-25-2013 04:41 PM|
|jart||Yes, there are a few threads (if you do a search for cerium). I tried it once years ago and it didn't work for me.|
|01-24-2013 07:57 AM|
Be sure to get the right amount of cerium oxide and mix it with water to form a suitable paste.
I could have sworn there was a thread on these forums about someone that used it...
|01-24-2013 06:26 AM|
|01-24-2013 05:23 AM|
Cerium Oxide is the professional way to polish glass. I'm sure it has differing grades of courseness and requires a lot of manual "elbow grease" but it's the best for the job as it's what glaziers use to get a crystal shine.
I'd say from a chemical point of view it'd be pretty inert (don't quote me on this) as it's just an oxidised metal. From my understanding it's like polishing your grandmother's silverware with "Silv-o" or cleaning a kitchen sink with "Jif" you just use a cloth and rub it in circles in the small area until the scratches / blotches are gone.
Polishing glass with Cerium Oxide
|01-24-2013 04:53 AM|
Thanks for the tips everyone! I will look into these suggestions.
I hope that I can do this without tearing down the tank--I know that this would take me all day. If I can find a less toxic product what about taping a drape underneath the abovewater area to hang above the water so I can work above it on the glass? Could I hope to do this?
Oh and here's another recent shot of the tank. I was rearranging it some more. I took this picture fast after wiping down the front pane with water. You can see a bit of the milky film up along the top of the front pane.
|01-23-2013 08:37 PM|
It should be possible in theory at least. A lot of the glass-fronted shops routinely get graffiti scratched into them, And then get it polished off. -If you look at the glass at a low angle, you can see the distortions from the uneven surface, but it looks pretty normal straight on.
I don't know how difficult this would be, or whether it would be cost effective (vs. buying a new tank).
If it's just a light haze, you probably wouldn't need to polish anywhere near as much.
Good luck, and let us know what happens if you try it.
|01-23-2013 06:41 PM|
Using it can be done in a stocked aquarium, but it is a lot of work.
|01-23-2013 01:15 PM|
Regardless of what you do, if it works let us know.
I've got a similar dilema with my large tank,,, looks ok filled but looks dreadful with dry glass. I'd like to dry start it, or do high humidity riparium, but may be stuck with a totally full tank as it looks so bad otherwise.
|01-23-2013 01:04 PM|
Try Mr.Clean magic eraser. Works wonders for me. Make sure it's the plain type.
Sent from my iPad using Tapatalk HD
|01-23-2013 12:50 PM|
YOU WILL HAVE TO REMOVE EVERYTHING
glass polish is a hard glue resin that has small diamond bits incased within it. it will remove small pieces of glass everywhere.. it will kill any fauna for sure
look up diamond paste glass polish. and rent a small orbital sander with a wool buffing wheel..
|01-23-2013 12:48 PM|
|Shangrila||Buff it with plain white toothpaste.|
|01-23-2013 09:44 AM|
|Strgazr||I have seen a guy on Ebay selling a fish tank aquarium glass scratch stain polishing kit. He is in the UK and I haven't tried it myself, but saw it and he has a lot of info on his post.|
|01-23-2013 08:39 AM|
|Bluek24a4||Having polished glass with chrome polish that you find in the auto parts store, it's probably not something you would want to get in your tank water.|
|01-23-2013 07:57 AM|
I was hoping that I might be able to carefully polish the glass without having to empty the tank, but it sounds as though polishing requires a lot of hard rubbing. So I will probably have to take it all apart.
|01-23-2013 03:36 AM|
Local car parts store should be able to point you in the right direction. They usually care a range of different glass polishing products. A watch repair store once told me the secret to polishing glass as well but I unfortunately forgot it - another good resource though.
And beautiful tank.
|This thread has more than 15 replies. Click here to review the whole thread.|