|06-05-2007 07:23 AM|
|y84k||I know this thread is old... I only was only able to find a couple places in Rochester, MN so far.. and the cheapest I have found is the local Praxair distributor.. he said 65.00 and then 9.xx to refill and they just exchange them because they are filled in the cities. The other place here in town wanted 95 for the 5lb tank.. he said the 10lb tank is about the same price but 20.xx to fill.|
|01-27-2006 11:46 PM|
|01-27-2006 08:22 PM|
|kunerd||So what size would u recomend for a 55g tank. And what do you tell them. Hey I need a co2 tank for my fish hoby|
|01-27-2006 02:27 PM|
|otter||Definitely go to Minneapolis Oxygen. They are by far the best to deal with, if you call around to some other welding supply shops you'll see what I mean. The guy at the Bloomington location ((952) 884-5286) was very nice and was used to dealing with others in the hobby. After I called he picked out and saved a brand-new shiny 20lb for me!|
|01-27-2006 01:40 PM|
|01-27-2006 11:29 AM|
I still get it from Minneapolis Oxygen Company...
@kimrin...it really depends....they have sales every now and then...
I just happened to walk into one a few months ago....and upgraded my 10lb to a 20lb at a kickass price...
the main thing is gonna be....which size tank you are gonna purchase...
which is a one time high initial cost....depending on size...
after that the refill is between 9 -12bucks..
so there aint gonna be that much difference..."refilling" a 5-10-or 20 lol
and ofcourse...the first time you buy the cylinder...the first fill is free
|01-27-2006 02:47 AM|
|kunerd||Need to know any updated info for the twin cites. Just ordered the semi auto from dr foster and smith and need to get myself a tank. WHere have you all gotten yours here in the cities????|
|08-23-2005 05:15 PM|
Well, dang it! The price sure has gone up. $65 for a 5lb now.
I suppose they're probably still the cheapest though.
|03-16-2005 03:55 AM|
I am Gassed
Well, I just wanted to state that I have contacted all of the places listed and Minneapolis Oxygen was the most courtous on the phone. AND they had a great price, I went there today, the store off of lyndale and the guy who ran it was awsome, even helped me with my regulator. Gotta give them a Plug
|03-03-2005 07:26 PM|
Dude! I work a block from Washington Avenue in Minneapolis! I could take a stroll on over there to get my CO2 bottles refilled!
|02-24-2005 08:58 PM|
|lumpyfunk||I also contacted Pepsi they are in Burnsville and will only send it to a resteraunt but it is a $75 deposite and $18 to refill on a 20#|
|02-24-2005 04:10 PM|
I got both my tanks from Minneapolis Oxygen Company....
very reasonably priced...I got my 5 lb for 50 ...and 10 lb for 70...
refill on both are I think 9 bucks and 12 bucks....
here are some details...
MINNEAPOLIS OXYGEN COMPANY
3842 WASHINGTON AVE N, MINNEAPOLIS, MN 55412
Phone: (612) 588-8855
MINNEAPOLIS OXYGEN COMPANY
8905 LYNDALE AVE S, BLOOMINGTON, MN 55420
Phone: (952) 884-5286
oh and most of the time...there is no charge for fill....these are filled bottle
prices ..that i got them from....
|02-24-2005 12:28 AM|
|Rolo||I used to live a less then mile from Toll Gas in Plymouth. That was the first place I went for CO2, but quickly found out they were charging higher prices. Cracked open the yellow pages, called up almost everyone under welding, and Minneapolis O2 was the cheapest supplier I could fine. That was the middle of last year though and things could be different now, but giving them a call to see if they will work out for ya.|
|02-22-2005 04:02 PM|
CO2 in MN
I am looking at going to a pressurized co2 system, and I am wondering what local sources are for co2. I figured this would be a good resource for others as well.
Toll Welding supply has 7 locations in the twin cities they sell the cyllanders and fill the bottles