|Topic Review (Newest First)|
|04-15-2010 02:35 PM|
Originally Posted by Fishstein View Post
Only issues with that are incomplete dosing with some powder still stuck in the compartment, moisture that might cake your hygroscopic salts, and any of the powder getting into the mechanism and hosing that one.
Originally Posted by zavikan View Post
Another drawback is that the solutions can settle over time, but that can be fixed by shaking them up once in a while, or even adding a tiny pump or stirrer to the solution containers.
And that's a good idea about using peristaltic pumps used in large scale for other purposes. Need to check that out.
|04-15-2010 01:20 PM|
wasserpest posted a nice pros and cons list for each method of autodosing. peristaltic doesnt have a single downside except for the $$$. There are quite a few cons against the syringe method (though I think its ingenious)
The basic idea I am trying to put out is that it ISNT expensive. Ya just need to shop right. Buying a brand new specialty pump from a specialty store is going to cost an arm an a leg over a used industrial pump (which is designed for heavy use) off an appliance repair store. The pumps design means as long as you replace the tubing, there is 0% cross contamination.
** and it cost less b/c I didnt attempt to redesign the wheel and purchase liquidosers and feeding machines to try and make something new and untested.
there are no reasons to replace tried tested and true methods unless there is a downside to them. As the downside to my design is believed to be cost, I'm trying to show thats not inherently true.
|04-15-2010 03:52 AM|
how is that cheaper?
Zavikan, very nice but how is that cheaper (not to mention equal or less effort) to what the other poster proposed?
The pumps, tubes, timers, etc. really add up.
|04-15-2010 03:29 AM|
Originally Posted by stcyrwm View Post
I hesitated to post this b/c your already involved in your own method.... but I did it anyways. I think its widely agreed that peristaltic autodosing is kind of the cadillac method. Nice but expensive.
Peristaltic pumps are used in many many applications. The most common being industrial dish washers. You can make yourself a very nice set up that will last years for very little cash. My system cost less then what ur at right now. (and the ghetto plumbing is gone).
In any case... good luck with it man.
|04-15-2010 02:37 AM|
How do you get the Lifeguard feeder to dispense correct amount?
If the feeder works by simply shaking powder in the hopper through holes, how do you know you are dispensing the same right amount every day?
Some very nice ideas here.
|02-27-2010 06:42 AM|
Originally Posted by Chasintrades View Post
|01-12-2010 05:58 AM|
Originally Posted by Big Bob View Post
Just when you thought you saw it all....
|01-12-2010 04:45 AM|
What about filling dry ferts into vitamin gel caps? You could potentially use a "compartment" type of feeder like Fish Mate automatic fish feeder.
|07-01-2006 11:44 AM|
Originally Posted by bigstick120
|06-30-2006 06:56 PM|
|bigstick120||That would be nice if you had a sump, only other option that I see is to hang it above your tank|
|06-30-2006 06:00 PM|
Anyone try the Kent Marine Aquadose? It's a gravity feed drip system. I was going to try making something similar, but found this online for $19 and thought I'd order one to try. I figured it was cheap enough to give it a shot and hopefully low tech enough to be consistant and reliable.
|05-07-2006 02:12 AM|
Originally Posted by SuRje1976
|05-07-2006 01:18 AM|
|JimmyYahoo||^ Thats pretty darn cool.|
|05-05-2006 12:04 PM|
Dosent get much cheaper than this.
|05-04-2006 02:45 AM|
|SuRje1976||All still going well with the Lifeguard Autofeeder?|
|This thread has more than 15 replies. Click here to review the whole thread.|