|01-12-2013 02:17 PM|
two would be great 1 not enough...
i'm trying the aquatop 15 UV now. it's a nice little filter, NOT a lot of media room soft flow though (softer then palm) and has a skimmer...
do NOT use the skimmer for a betta (trust me on that one.. oops)
it's $$$$ but if you want uv not bad for a small hob
fit MORE media in my palm though ....
using it with charcoal/purigen after medicating a tank or just as a UV hit for the betta tank as mine will EAT anything in their tank (or the next tank if they can see it).. keeps the alge at bay.
|01-12-2013 02:06 PM|
|MABJ||Check out my thread in my sig! They do good work. Should be a fun read|
|01-12-2013 02:04 PM|
|01-12-2013 02:03 PM|
|MABJ||I run 2 azoo palms on my tank. Love them at medium flow. They pick up a lot and are easy to clean.|
|01-12-2013 01:17 PM|
|01-12-2013 06:18 AM|
Ohh nice! My name is Cindy. I lived on Brighton Ave. all my life but depending on our ages we might not know each other. I was the ACHS c/o 2004 :P
|01-11-2013 02:22 PM|
As I mentioned above, you can pack the filter full of floss and other media, you can use a smaller impeller and there are various other methods if there's too much flow. You can even put some sort of a baffle on the outflow to dampen things (there are several versions on the forum to give you an idea of what to create if necessary).
I'm betting just turning down the flow all the way will be sufficient.
|01-11-2013 02:19 PM|
|01-11-2013 02:08 PM|
You use a Dremel and cut it. Could also use a hacksaw to cut it to the length you'll need so it fits in your tank.
|01-11-2013 01:48 PM|
|01-11-2013 01:47 PM|
|01-11-2013 01:40 PM|
|we4wieners||I currently am using a the deep blue nano microfilter HOB on my 1.5g. It works great but no water movement around the tank.|
|01-11-2013 07:17 AM|
I haven't tried it personally but have read some positive feedback about the AZOO Mignon 60. It's about $14 on Amazon!
Also, AC represent! Lived there all my life until I moved to CA.
|01-11-2013 02:40 AM|
Have you ever tried a Tom's Mini Canister? It works great on small tanks as well!
|01-10-2013 10:02 PM|
Is your tank the Deep Blue Professional 3-gallon tank?
If so, the AC30 will be fine. You'll just have to use a Dremel to cut down the intake pipe, turn the flow all the way down and fill it full with filter floss. If it's still too much flow, you can swap out the AC30 impeller for the AC20. I use 20s on my 3gal tanks and love them.
|This thread has more than 15 replies. Click here to review the whole thread.|