|01-10-2013 09:44 PM|
or a Vortech if you don't want a powerhead taking up alot of space.
I have a mp10 in my 40g and it was worth every penny.
|01-10-2013 09:28 PM|
Cannister filters are great for filtration, but have generally not provided my tanks with adequate circulation, even when I have used ones far over-rated for their size. For a heavily planted tank, you will probably have adequate filtration, but not necessarily enough circulation.
I concur with the above koralia powerhead/circulation pump suggestion rather than adding a second cannister.
|01-10-2013 08:59 PM|
|driftwoodhunter||Or a Koralia-type circulation pump.|
|01-10-2013 08:44 PM|
|infamouz23||If you're not concerned with the level of filtration in your tank, I'd look into a power head.|
|01-10-2013 02:57 PM|
I don't have this filter, but it looks like its rated for up to 175. I would think that would be enough flow.
As far as positioning, I think generally you want the in and out to be in different places so that its pulling flow across the entire tank. As far as positioning 2 intakes, or any powerhead I think the idea is that you want stuff moving in the same direction... or creating some kind of cyclical flow as appose to 2 things moving at each other.
I would just set it up and see how it looks. I think you want to have a gentle movement over the plants, and if it doesn't seem to be achieving that you can see what else you can add to improve.
|01-10-2013 02:22 PM|
I have been reading through tons of tank journals and other posts here on the board trying to get a good set of hardware put together for a tank I will be setting up in the next couple weeks. After much reading, I am starting to wonder if I will have enough flow in my tank for the plants.
I will be setting up a 75 gallon tank. I currently have a Rena XP3 filter. I was wondering if I shouldn't buy a second one and put both outlets (to canister) in the center of the tank on the back wall and then one return on each end of the tank pointed towards the center. I know that I don't need the "extra" canister for filtration as that is what the plants are for, but I want to make sure that I have enough flow. I also realize that I could accomplish this with a power head. However I don't really want this tank to have large pieces of equipment in the tank.
What is your opinion on this? Is this overkill? Would this be a good option? Thoguhts on the matter please and thank you.