|01-10-2013 03:53 PM|
I have the aquatech 3-in-1 diffuser:
And the fluval diffuser plus bubble counter.
Of the 2, I like the fluval system better for my paintball CO2 set up. It's more accurate for controlling the bubble rate (bubble counter) and the bubbles diffuse more evenly in the long run. At first, I liked the aquatech version but as soon as the porcelain gets dirty, it distributes unevenly and you get bigger bubbles. You change the porcelain top less frequently with the fluval than aquatech
|01-10-2013 02:59 PM|
Even more alternatively, you could build your own reactor. There are various different builds so you'll just have to read around and figure out which one best suits your needs.
|01-10-2013 02:34 PM|
|etgregoire||I know you're probably not supposed to do this, but I was kind of sick of the bubbles in the aquarium. I have a GLA atomic diffuser and it did a decent job, but I wound up just putting it in the filter intake and it does a better job diffusing. I probably should just get a reactor.|
|01-10-2013 06:54 AM|
|01-10-2013 06:15 AM|
|FlyingHellFish||Cig filter in tubing = pretty damn fine bubbles to me. Try it out.|
|01-10-2013 06:07 AM|
|Bettatail||get the super atomizer type.|
|01-10-2013 05:34 AM|
I have the ista one. It is cheap & does not work well. All the other ones on the page are cheap.
Green leaf aquariums look the best but if you go to their home page they are always out of stock. Sorry I am not much help. The CO2 diffuser is important & most diffusers are cheap & will not last long.
|01-10-2013 05:10 AM|
Co2 diffuser types
Am getting a co2 diffuser, this Aquili CO2 diffuser but I found this Co2 diffuser from a Chinese website which has Co2 diffusers similar to it, here. Are there a huge difference in quality, are they like air stones not much a difference from brands.