|01-04-2013 09:09 PM|
pvc cement is non toxic when cured. has to be as its used for drinking water plumbing
i've stuck in an emergency a glued pvc pipe in for filtration 30 minuts after cementing with no issues on livestock
I would not reccommend that as a daily occurence but for emergency, it worked.
|01-04-2013 07:54 PM|
This doesn't make sense. If it's contact with the water, it wouldn't make any difference if the toxic chemical is in contact with the water while it's in the tank or about to be in the tank.
Maybe I don't understand what you meant, but it's a bit misleading.
|01-02-2013 01:08 PM|
Thanks for the quick replies.
|01-02-2013 12:58 PM|
The answer would totally depend on where the PVC is located....
Is it inside your tank or OUTSIDE?
If it sits INSIDE, it has to be NON-toxic & has to say it on the packaging.
If it's PVC for your filtration system & it's located outside, then it doesn't matter.
You could also use teflon tape instead.
|01-02-2013 12:56 PM|
For the temp fix - sounds like it will do the job, but have never done it.
For real fix - yep, sounds right, cut it off and redo.
|01-02-2013 12:45 PM|
PVC temporary fix..hot glue?
I just build my first PVC system, and I guess I didn't seat one of my joints tight enough so it has a small leak. I won't be able to get any more PVC till tomorrow so for a temporary fix I sanded the joint, dabbed a bit of PCV cement, wiped off the excess, then used hot glued around the whole joint. Anyone ever try this?
As for a real fix, I guess I have to cut off above the joint and redo everything?