|Topic Review (Newest First)|
|12-23-2012 04:30 AM|
And the only reason you'd need a perma-seal or a nylon washer to seal you cga-320 connection is when you have a standard one. It is my belief that those atomic regs don't need them.
|12-23-2012 03:19 AM|
|Axelrodi202||I thought that it was necessary to use on all connections between components in the CO2 system to prevent leaks.|
|12-23-2012 02:46 AM|
|12-23-2012 02:45 AM|
Originally Posted by oldpunk78 View Post
Should I still use pipe compound for the other parts of the setup?
|12-23-2012 01:49 AM|
Originally Posted by freph View Post
|12-23-2012 01:47 AM|
The reason it's so easy is because that atomic reg has a built in soft seal that does not require an extra washer or perma-seal on the cga-320 side. While I have not used one personally, the whole thing should just be hand tight.
|12-23-2012 01:43 AM|
Perma seal, no. Just a nylon washer to make the connection of the adapter and CGA 320 sealed. After that, just screw it onto the paintball tank.
|12-23-2012 12:41 AM|
I've now ordered a GLA Atomic Regulator V3, 50mm atomic diffuser w/ check valve, atomic bubble counter w/ integrated check valve, an extra atomic check valve, CGA 320 to paintball adapter, and a 24 oz paintball tank.
Will I need a perma-seal and pipe compound? How do I go about actually attaching the regulator to the full paintball tank?
|12-02-2012 07:57 PM|
Grip nut check valve uses the plastic nuts to screw the tubing on for a tight seal. If you are describing the one I am thinking of, then it is made of plastic.
Plastic eventually hardens with time. Brass does not, but you have to get a quality check valve; I have tried a few and they end up not working (allow water to leak backwards), so I've given up and just stick with plastic check valves now (and replace them every so often).
For your questions regarding pressurized CO2, might I suggest you take a look at my guide to pressurized CO2 (linked in my signature below).
|12-02-2012 07:55 PM|
|12-02-2012 07:52 PM|
|Axelrodi202||What is the difference between a grip-nut and brass check valve?|
|12-02-2012 07:41 PM|
You will need the regulator (which comes with a solenoid), paintball tank in the size you want (not a cartridge, it's a small tank), adapter (cga 320 paintball adapter), diffuser, check valve (GLA sells nice metal ones), CO2 tubing, and a timer. Then you would be set.
I am not all that sure of the quality of that particular regulator so I am not saying to go with it or not, GLA sells quality stuff and I trust them, I just don't know anything about it.
|12-02-2012 07:25 PM|
So then this regulator would be good to use with an adapter?
What other components besides the regulator, solenoid, cartridge, and diffuser would I need?
|12-02-2012 06:55 PM|
That said, I still recommend a standard regulator, adapter, and a paintball tank if you want a small setup. I don't think it will be better than a paintball regulator from GLA in function, I just think it will be a better financial decision in the long run.
|12-02-2012 06:37 PM|
|Axelrodi202||The GLA atomic regulator in the system I linked to is sold separately elsewhere on their site so I imagine it doesn't have proprietary threads. Does anyone have any personal experience with this regulator?|
|This thread has more than 15 replies. Click here to review the whole thread.|