|12-06-2012 02:50 PM|
It is a fairly common mistake - changing out all of the filter media at once. The other common problem is rinsing filter media with tap water in the sink thereby killing all the beneficial bacteria in the chlorinated water.
In my Aquaclear filters I only run two sponges. Once a month when doing my weekly water change I rinse them in some of the tank water I siphoned out. When I need to replace sponges (about every 2 years) I only replace one per month.
|12-06-2012 02:11 PM|
This has mos def been a learning experience for me. Thanks for everyones help and restraining as best you could in saying "YOU ARE A DUMMIE".
I feel like I've hit a bit of a reset button on my tank and that's fine as long as I can progress from the mistakes.
As of right now I've taken out all of the driftwood I collected myself. I'm just going to buy some spiderwood I saw at a local pet shop and stay with that for awhile. I just received a C02 diffuser in the mail so I'm going to work on a DIY system and just back off the Excel and maybe just dose some Flourish twice a week.
Thanks again for everyones help/advice.
|12-06-2012 02:06 PM|
|12-06-2012 04:38 AM|
|danakin||Largely a "your mileage may vary" deal, but give this thread a read: http://www.plantedtank.net/forums/sh...ad.php?t=25341|
|12-06-2012 04:09 AM|
|12-06-2012 04:03 AM|
|12-06-2012 01:48 AM|
If the carbon bag has been in there more than a month or two, it's no longer chemical filtration (which is generally totally unnecessary except in very specific, short-term circumstances, IMO). Instead, it's simply biological filtration, and does the same job as the BioMax.
I'm a fan of strictly mech filtration, and therefore don't use bio-balls, rings, or any other high-surface-area bio media at all in any of my HOB's or can (mech media dual-purposes as bio media). Many disagree, and use a combo of mech and bio. Fairly few, however, run chem media 24/7.
You can set your filter up however you like, and it will probably do its job just fine. However, replacing the mech media monthly is a waste of both beneficial bacteria and perfectly functional mech media.
If your problem stems from a mini-cycle, this may be the root of, and solution to, your problem.
|12-06-2012 01:22 AM|
|ANTIplastic||Sorry if I state the obvious to anyone, but the aquaclear 30 comes with a three part system. From bottom to top it goes Foam, the carbon bag, and the Bio Max bag. I understood it to be that you rotate out every month the foam filter (which are the ones I replaced) and the other two you keep going. I guess I was way off?|
|12-06-2012 01:16 AM|
|12-05-2012 11:35 PM|
When you say "switched out", do you mean you cleaned them, or literally swapped the old sponges for new ones?
I have several HOB's mostly AC's, and a canister, and I probably keep the same sponges for a year. Filter floss tends to break apart sooner, so I replace that stuff maybe every 6 months. Once a month, a few squeezes, sit for a few minutes, and a couple swooshes, all in tank water, and I'm good to go (except for the one prefilter I use on an AC70 - that gets squeezed in running tapwater as many times as it takes to get clear water ...and those only last a few months due to this abuse).
|12-05-2012 02:45 PM|
|TexasCichlid||You have no plants? ( basically none ) Why add Excel?|
|12-05-2012 02:03 PM|
Congrats! I think you have answered your own question. I try to remember that my aquarium operates as a 'system' and changing just one thing can have an affect on several others. I can't tell you how many times what I thought was the 'obvious' cause of a problem was not the cause at all.
Your tank will need to cycle again. Test for ammonia, nitrites, and nitrates and do water changes as necessary to keep levels down. If you have another tank take some mulm from the filter and add it to the filter of this tank to help 'jump start' the process.
|12-05-2012 11:59 AM|
|12-05-2012 11:46 AM|
|ANTIplastic||As I've been dealing with this it's crossed my mind that in some ways its as if I started a new cycle on my tank. I say this because I switched out my light bulbs. I had a simple T8 full spectrum then I changed it to a T8 Floramax bulb to help my plants. Then I switched out both of my filter sponges as I do once a month, then of course I added a dose of Excel. This was all done in one day and ever since then I have had this white cloud.|
|12-05-2012 11:41 AM|
|ANTIplastic||the main big "stump" like piece of DW has been in there for over 3 months. The other vine like pieces are fairly new. I'd say about 3 weeks. I never notice any serious cloudiness such as this. How would DW spark a white cloud 3 weeks later?|
|This thread has more than 15 replies. Click here to review the whole thread.|