|Topic Review (Newest First)|
|12-04-2012 05:54 PM|
Currently maintaining 840 gallons of 100% RO product water systems with GLA GH booster and NaHCO3 used to set the mineral content. CO2 injected high light to Walstad method tanks that go 3 months or more without adjustment or water change.
1st - sodium, so more salt beyond the content of the sodium bicarbonate.
2nd - potassium which depending on the type might be Potassium Bicarbonate KHCO3 which happens to be the second elemental compound that has good solubility as an applied buffer.
3rd listed is magnesium which has ZERO bearing on carbonate buffer levels and,,, "other bicarbonate salts" which would be what exactly?
Water chemistry only recognizes a handful of elemental compounds that have effect on pH most of which have extremely poor solubility and or also effect GH.
NaHCO3 (baking soda), Sodium Bicarbonate which cost pennies and KHCO3 Potassium Bicarbonate which is 3-4x the price both mix extremely well but nothing else I've found does.
My lovely daughter has a Masters Degree in Chemical Engineering and works on the Everglades Restoration Project currently, we have had grand conversations on this topic.
|12-04-2012 12:04 AM|
Originally Posted by jpmfx View Post
That has generally been my experience with it as well, and I'm very satisfied with the efficacy of the product.
In answer to the question: "Does Seachem Alkaline Buffer contain anything besides sodium bicarbonate (plain baking soda) ? " , put to the Seachem lab,
"Besides sodium bicarbonate, Alkaline Buffer contains, sodium, potassium, magnesium, and other bicarbonate salts".
(These 'other bicarbonate salts' are not specified by Seachem).
|12-03-2012 11:55 PM|
I have a new 20g tank with pool sand and safe t sorb substrate. It's been a beast to cycle because of low ph. I tried a couple of ph raisers to no avail. However seachem alkaline buffer has changed all that.
very stable, it has maintained ph at a high enough level for beneficial bacteria to do their job. working like a charm!
|12-03-2012 10:58 PM|
Well be that as it may, that still does not explain why baking soda is a non-lasting pH raiser (I've used it many times in the past, I know), whereas the Alkaline buffer certainly appears to stabilize and maintain pH.
Seachem says it's usage doesn't raise potassium or phosphate levels, and that it is a "sodium bicarbonate based buffer". Those statements do not reflect or deal specifically with what other elements may be in the formula to make it an effective buffering agent, perhaps justifying it's value and therefore extra cost over a grocery store bought baking soda product.
|12-03-2012 10:11 PM|
should be nothing to debate,,, why
it's expensively packaged sodium bicarbonate used due to the fact it doesn't raise phosphate or potassium levels,,,, Seachem say's it is.
from the link:
Q: Is your Alkaline Buffer™ a sodium bicarbonate?
A: Yes, it is a sodium bicarbonate based buffer
|12-03-2012 09:51 PM|
Well, for what it's worth, the nitrate levels in my discus tank are pretty much the same as yours, at all times, mainly due to the large, frequent wcs that I do for the discus.
Yet my plants do grow quite well, with root tab ferts in the PFS substrate, and weekly moderate dosings of Excel, Comprehensive Supplement, and occasional dosings of other liquid fert products, same as you basically.
See for yourself:
http://s1105.photobucket.com/albums/...spaul/Sept2011 - and a year later:
As for increasing the GH, I believe I already mentioned that I occasionally add some Seachem Equilibrium, as many aquarists here in Vancouver do, in view of the soft water conditions with very low mineral content.
|12-03-2012 09:20 PM|
Thanks for the results. They do look promising.
I'm wondering if it's both the KH and GH that is making the plants unhappy or if perhaps I just don't have enough nitrates in the tank for them? Nitrates are barely measurable. It's not 0, but it's not even 5.
My anubias petite is showing more yellowing leaves. It's never had this problem before. I've had this same tank set up for several years, same anubias plant, and only recently had to recycle it as the last fish died that was in the tank and it sat for a month empty of fish, still had water and filters going.
Should I just worry about the KH or should I also worry about raising the GH too?
For ferts, I don't dose any co2, I have root tabs for the guys that need them, and I have leaf zone and flourish (not excel). Is this enough for them or do I need to look for something else?
|12-03-2012 05:41 PM|
Just looking at the MSDS for the alkaline buffer and sodium bicarbonate I am not sure there is a difference.
Perhaps the short life of baking soda in the tank is because whatever removed the carbonates from the tap water is still working? Certain substrate, nitrifying bacteria and plants can all remove the carbonates no matter if they came in with the water or were dosed afterwards from a jar on the pet store shelf or an orange box in the kitchen. Test kits for aquarium use are not very accurate, so seeing falling levels, then 'suddenly' zero might not really mean much.
Run this test:
Get 3 jars or glasses of tap water.
Add the same dose of baking soda and alkaline buffer to each of 2, the 3rd is plain water, no additives. Measure carefully, by weight if possible.
Test GH, KH, pH and TDS when you first set it up, then daily for several days.
Stir the water once in a while, or else set up the same system them, such as splitting a small air pump between them. Make sure the water movement is the same. Easier, perhaps, just to stir them with a spoon morning and evening.
a) they create the same initial change in the water parameters compared to the plain water.
b) maintain that change the same length of time.
I have used baking soda in several tanks for several reasons and had no problem with it maintaining the KH level.
If SOMETHING was removing the carbonates before I added the baking soda, then that same process continues and removes the carbonates dosed via the orange box from the kitchen.
If NOTHING was removing the carbonates, and I just wanted harder water (for Rift Lake Tanks, or Live Bearers) then that same nothing continues doing NOTHING when the baking soda is in the water, and the water maintains the proper level of KH as long as I have let the tank go. Mostly I was doing weekly water changes, and setting up the new water with baking soda to the parameters I wanted in that tank.
In some of these tanks I also had coral sand, either as substrate, or in the filter. These tanks also stayed stable through the week, but the reaction was too slow for me to add tap water to the tank for a water change. I would add baking soda to the tap water so it would be where the fish were used to it. I was doing large water changes, so that much drop would not have been good for them.
Why is Sodium bicarbonate a 'chemical' (with undesirable overtones) and baking soda is OK?
|12-02-2012 07:16 PM|
Just completed a 50% wc @ 10:30 this a.m. (PST)
pH before wc: 6.8
pH of water straight out of the tap: 7.0
pH of water after wc: 6.8
Doesn't go to show much, given the pH of our water right out of the tap.
However, my pH has remained steady/stable for 4 straight days after adding a less than recommended amount of Seachem Alkaline Buffer to my tank, which was consistently well below 6.0 pH for a long period of time (off the chart - perhaps as little as 5.0 - good for discus, not so good for the bio-filtration).
Anyway, I'm going to continue to monitor frequently, and add an appropriate amount of buffer, if the pH begins dropping either between wcs or after, or over time.
So far, the buffer seems like a good, safe, effective product.
Hope this helps with your situation, GA-KO.
|12-02-2012 01:52 AM|
|12-02-2012 01:39 AM|
It won't go from 6 to 7 in an instant - it will take several hours to raise it that much - perhaps even overnite. I have used it quite safely.
However, if you want to be super extra careful, just add a pinch or so every couple/few hours, until you've added no more than 1/3 of a tspn in total, and then leave it at that.
(I think that's overkill, but it may give you peace of mind).
Keep in mind that Seachem makes excellent products, probably the best in the aquatic world, and I'm quite sure their chemists want to do everything possible to maintain the company's good reputation - so I believe the product is safe for your fish.
I've just recently used this buffer in my tank, which raised the pH in my tank from under 6.0 to about 6.8, and which has maintained steady for 3 days now. I'll be doing my usual twice weekly 60 % wc tomorrow - so I'll test then again & see how the pH has held up, or otherwise, and let you know - fair enough ?
|12-02-2012 01:04 AM|
How much do you add at the time? Being that there are 4 Phoenix Rasboras in there I know it would stress them to have it go from 6 to 7 in an instant.
Do you add the alkaline buffer with each water change, or if not how often do you need to add it?
|12-02-2012 12:36 AM|
You're quite right about the baking soda. It's simply a band-aid and will only raise pH for a very short period of time, and needs continual replacement.
I'd suggest you ask your LFS for a handful of crushed coral - then bag that and hang it it your tank - it should raise your pH to a desired level fairly quickly & maintain for a considerable period of time, even with wcs.
A small 5 gal tank like yours can indeed be a risky environment for using chemicals to either lower or increase pH.
Having said that, Seachem's Alkaline Buffer is a particularly safe product to use.
I have used it in my 75 gal discus tank to maintain pH around the 6.8 mark, and it does the job very well.
All your tank would need is no more than 1/4 to 1/3 of a level tspn to bring your pH up to 7.0 and keep it steady there.
|12-01-2012 11:48 PM|
I did a quick test on the water since it's been sitting out for a good amount of time with the bubbler. Not good, PH is in the mid 6's. All those colors look awfully close in color, I'd say it's closer to 6.4 or 6.2, it just wasn't yellow that 6.0 is on the test. It was a funky shade of green.
So I tested KH and GH, both still holding steady at 2. So it is seeming to be the water.
So it does look like I need bad help with this water. If I were to go with one of those seachem additives, are they super stable and don't run out until you change water? I used baking soda when I was doing the fishless cycle on the tank and found it'd maybe last a week at most and would hard crash almost over night when it wore out. I don't want to run any sort of risk of any buffers just stalling and cutting out to cause a crash. And I do understand if I do water changes I'd have to replenish the amount back in.
Which should I look for? I'd like 6.5 or 7 on the dot. Being my tank is 6.0 right now how much of it should I put in at once? My tank is 5 gallon.
|12-01-2012 11:11 PM|
Add baking soda or other source of carbonate or bicarbonate to raise the carbonate. Potassium bicarbonate is another good item for this.
Carbonate is the most common buffer of pH in aquariums, and is the one to use when you want to raise the pH.
Nitrifying bacteria will use the carbon from carbonates.
Some plants can use carbonates as a source of carbon, but they usually do not do this unless the CO2 is getting really low.
Many organic processes like decomposition can create an acidic response.
Wisteria is a tough plant. Get the pH under control and see if it makes a come-back.
Tap water left out to test the pH does not need to be aerated, that just makes the process happen faster. So keep the bubbler going and you might be able to test in just a few hours, though a 24 hour test is better.
|This thread has more than 15 replies. Click here to review the whole thread.|