|01-27-2015 01:06 AM|
|MsNemoShrimp||Thanks for the link Zodd|
|01-23-2015 07:40 PM|
That's where I got mine.
|01-21-2015 06:50 PM|
|01-17-2015 07:26 PM|
Just started about 10 days ago.
Just came out from a 3 day blackout after a dance with BGA.
Light: Hagen GLO 39Wx1 T5HO @ 8 hours /day
Substrate: Stratum/Flourite Black Mix
Heater: Compact 50W heater - don't know the brand.
Filter: Filstar XP1 filter - will be replacing in a few days - this guy is too loud to be a bed room tank. Will be an API Nexx Filter with custom media setup and Cobalt EXT-inline pump soon.
CO2: 5lb pressured w/ Single-stage CO2art Regulator. Haven't hooked it up yet - will have it into filter intake when I have the pump in. Planning to have an atomizer located below the filter intake in the future. I have an inline atomizer, but I don't want to mess around with it.
Plants: Glosso, HC, water lettuce. Floaters will be removed after the carpet establishes itself, only there to outcompete the algae. Toying with the idea of replacing it all with Monte Carlo in summer.
|01-17-2015 01:21 AM|
No clamps on glass pipes.
Reply on the tight soft hose to seal itself on the pipe. Assemble wet.
Pour warm water in new hose so it will relax.
|01-16-2015 11:54 PM|
|01-16-2015 02:55 AM|
Here is a pic I took just for this thread on my 12 long. I don't update my journal enough but all the info is there. "Exclusive Pic" for the 12 long club haha.
|01-15-2015 09:16 PM|
Thanks for your reply on the lily pipes. My hose is 5/8" with a 16mm inner diameter which is why I'm having a hard time finding the right pipes. The Viv are too small from what I saw so far.
The Do!Aqua pipes are 10 or 13mm.
Also I don't want the intake pipe to be more than around 7" on the inside of the tank.
|01-15-2015 09:05 PM|
|01-14-2015 11:39 PM|
2 of ADA Do!Aqua violet glass・mini (outflow) MP-1 10D mini pipes.
1 of ADA Do!Aqua violet glass・mini (inflow) mv-1 13d pipe.
Eheim 2211 is perfect for one inflow and outflow.
I get a very even distribution of CO2 and no dead spots or eddies with 2 returns. Use a 1/2" y-pipe. 3/8" soft hose will stretch after heated in warmed water and a little ambition.
|01-14-2015 11:02 PM|
Lily Pipes for 12 Gallon long??
Can anybody suggest which lily pipes would work on a 12 gallon long? Especially interested in the intake pipe not being more then around 7" as there's a couple inches of substrate in the tank. Been searching on Amazon, eBay, AliExpress, Marine Depot, etc. I'm using a Sunsun 402B filter, so looking for 16mm diameter pipes.
|01-14-2015 10:51 PM|
My favorite scissor is the wave.
Search around for a stainless steel set of scissors and tweezers.
Wave scissors may be sold individually.
|01-14-2015 10:47 PM|
|12-29-2014 08:44 PM|
|12-23-2014 12:05 PM|
Wassup fam. Just some progress pics of my Mr.Aqua 12g. Sorry for the terrible quality..
Today - Dec 23
|This thread has more than 15 replies. Click here to review the whole thread.|